User manual ENCORE ENPS-2001

[. . . ] TABLE OF CONTENTS COPYRIGHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 COMPONENTS AND FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For example: SET BINDERY CONTEXT = O=ABC; OU=SALES. OU=ABC-USA. O=ABC; OU=TECH. OU=ABC-USA. O=ABC ; 5. When done, save the new AUTOEXEC. NCF file. Please restart your NetWare file server in order for new settings to take effect immediately. Next, please refer to "Auto Setup" section in this chapter to finish installing your print server. Log into your NetWare file server as a Supervisor (Admin. ) or equivalent via a Bindery connection. Run NetWare's PCONSOLE and add users to the "Queue Users" list. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to the NetWare print queue serviced by the print server. 42 Note: Please refer to NetWare's Print Server/Services manuals for detailed PCONSOLE commands. AppleTalk Setup The print server can print jobs submitted from Macintosh workstations connected to an Ethernet using AppleTalk protocol. The basic configuration is for the print server in an AppleTalk environment is performed simply by opening the Chooser window and selecting a printer that is connected to the print server. 1. Click Setup, it appears the sub-menu. 2. Click AppleTalk, it as shown in the following picture. 3. Zone Name: In this option, type an AppleTalk Zone name that you want the print server to belong to or leave it in default (This enables the print server automatically search and link itself to the default zone that is set on the AppleTalk router, if found). We also assume that at least an AppleTalk Zone exists on the network. If no any zone exists, the print server itself displays the zone name as an asterisk (*) in the current AppleTalk Status of the print server in the web browser. 4. Port Name: In this option, type a name for identification purpose or just leave it in default (recommended). Note: The default print server's Chooser name is as shown as follows: 43 <ATALK_PS>-xxxxxx-1, where xxxxxx represents the last six digits of the device's Node ID. You may also change the <ATALK_PS> to a name you like for identification purpose in this option. The print server will append the last six digits to the name you specify. Printer Type: In this option, the LaserWriter of printer type by default (recommended). 6. Data Format: In this option, data format includes ASCII, TBCP and BCP. Setting Up a Macintosh Computer 1. At a Macintosh computer, from the Apple menu, select Chooser. The Chooser window then displays an Apple Zone list. Select the Zone name that you specified when configuring the PRINT SERVER. Note: If you select a Zone that the PRINT SERVER doesn't belong to, as you specified in the previous section, no print server will be displayed in the Step 4. 3. 4. If you are using a PostScript printer you can select the LaserWriter 8 icon. The Chooser window then displays PRINT SERVER (s) featuring the support for AppleTalk protocol, along with its default Chooser Name in the right-hand Select A PostScript Printer dialog box. Note: 1. You may change the default Chooser name and Zone name of a PRINT SERVER by using your web browser before proceeding with this installation. Please see the previous section in this chapter for details. [. . . ] Recheck the print server connection by running the PSAdmin. It should read "Connected. " Question B Print jobs start printing, but print very slowly or print unknown characters. Possible explanation and solution A printer driver is missing or is incompatible with that printer. Using a print driver that is not specific for the printer can cause printing errors. [. . . ]