User manual ENERGIZER ENERGY 240

[. . . ] 40 1 EN SECURITY INFORMATION Please remember to obey relevant rules and regulations whenever use your phone. This will prevent bad effect from you and the environment. General security Don’t make or receive handheld calls while driving. Keep your phone at least 15 mm away from your ear or body while making calls. [. . . ] 20 21 EN CONNECTING TO INTERNET Learn the basics to configure your phone and connect to Internet. Set the parameters according to your carrier. The basic parameters are: • • • • • Account name APN Username Password SIM selection (if necessary) Some carriers use Proxy Servers, refer to your carrier configuration for more information. Once the needed parameters are set, press < OK > and confirm the new connection pressing < Yes >. To use the connection as default, press < Options > then Change default. 22 To add another connection, repeat all the steps. Configure the browser Once the connection is added, you need to configure the Internet browser: 1. In Menu mode, select Services → Internet service → Settings → Data account, select the SIM card (if necessary) and choose the connection created in the previous step. Switch between carriers (SIM cards) If you use multiple SIM cards and want to switch to another one, follow this steps: 1. Configure the connection for both SIM cards (refer to “Add a new connection”). In Menu mode, select Services → Internet service → Settings → Select profile and choose SIM1 or SIM2 according your necessities. Is possible to select Always ask, then the browser will ask which SIM you want to use before start the Internet session. 23 EN USING THE BLUETOOTH Learn about your phone’s ability to connect to other wireless devices for exchanging data. Turn on the Bluetooth wireless feature 1. To allow other devices to locate your phone, scroll down to Visibility and press the left soft key to turn it On. Enter a PIN for the Bluetooth wireless feature or the other device’s Bluetooth PIN, if it has one, and press <OK>. When the owner of the other device enters the same code or accepts the connection, pairing is complete. Select the file or item from one of your phone’s applications that you want to send. Press < Options > → Send → Via Bluetooth → Select the device name then accept the file on the receiver. receive data using the Bluetooth wireless feature 1. Enter or accept the PIN for the Bluetooth wireless feature and press < OK> (if necessary). Press < Yes> to confirm that you are willing to receive data from the device (if necessary). [. . . ] 2015/01/27 (Date) Luis Sosa / CEO (Name and signature of authorized person) Maximum SAR for this model and conditions under which it was recorded: GSM 900 GSM 1800 WCDMA 900 WCDMA 2100 0. 127 W/kg 10g Body SAR During use, the actual SAR values for this device are usually well below the values stated above. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your mobile device is automatically decreased when full power is not needed for the call. The lower the power output of the device, the lower its SAR value. [. . . ]