User manual ENERGY SISTEM ENERGY F3510

[. . . ] ) Compatible with JPG pictures from the majority of digital cameras. Can also be charged via USB port of any computer. Also can be use don magnetized surfaces. To provide electrical energy to your unit you can use two methods: You can either use the AC/DC power adaptor with USB 5 pin mini-B type connector provided with the unit (although you can use any other adaptor with USB 5 pin mini-B type cable), or you can connect the digital photo frame directly to a computer with the provided USB cable. [. . . ] We recommend changing the image at least once or twice a day, or even better use slide show with a high elapse time. press ENTER to do a zoom on the current image. The zoom level is displayed on the top left corner of the screen. Using the MODE/DOWN/ UP/ESC buttons you can move the amplified image to the left/up/down/ right respectively. To exit the zoom mode, press ENTER three more times to return to single show. Press three more times the ENTER button to fully rotate the image back to the original position. Press MODE button while watching an image to enter the slide show mode. Images inside the built-in memory or the memory card will be displayed sequentially. To modify the wait time between images, press repeatedly MODE and select your desired time interval. To get back to single show mode press ENTER, and to go back to the thumbnails press ESC. Images to the built-in memory you must have a compatible memory card inserted. In this screen, you have four options to manage the built-in memory: "Copy one": Select this option to copy one image from the memory card to the built-in memory. use the thumbnails to select the appropriate image and press ENTER. On the bottom left corner of the screen you will see the messages "PROCESSING. " and "SAVE OK" if the process is successful. When you are done copying images, press ESC to exit the thumbnails back to the SETUP menu. "Copy all": Select this option to copy all the images in the inserted memory card to the built-in memory. the images will be transferred sequentially and a status message will be displayed for each one. If the memory gets full a warning message will appear. "Delete all": To delete all the images in the built-in memory at once press ENTER while selecting this option. On the bottom left corner of the screen you will see the messages "PROCESSING. " and "PROCESS OK" if the emptying is successful. [. . . ] Warrants its products to be free from defects in materials and workmanship at the time of purchase. The warranty period is 36 months from the date of purchase for Digital photo frames. Com and select your product to view the FAQ (Frequently Asked Questions). The solution to your problem is very likely to have been already published there. [. . . ]