User manual ENERGY SISTEM MP3 ELEGANCE 4000 COMPACT

[. . . ] ENGLISH MP3 ELEGANCE COMPACT USER MANUAL V2. 1 www. energysistem. com . 1. Notice 1. Please use provided format tool to format your MP3 player, it will not work if you use Windows format Tool. If you haven't installed the provided Digital Audio Management System, please use the "delete" command to the erase files in your player. The MP3 player will be damage if formatted under Window's format tool. [. . . ] You could select an intended section by using A-B repeat button. (It is especially suitable for language learner. ) 1. While MP3 is playing, press the A-B repeat button to designate the Start position. Press the A-B repeat button again at expected time to designate the End position; then the designated section will be repeated automatically. To release the repeated section, press the A-B repeat button or move to previous/next track. Designate the Start position A Designate the End position B www. energysistem. com . 2 . 1 SD or MMC Card You could use SD or MMC card to store more mp3 files. The player has to be turned off before inserting or removing an SD or MMC card. Inserting an SD or MMC card: 1 Turn the power off. 3 Insert the SD or MMC card into the slot following the arrow direction illus trated on the player. 4 Turning the power on, you could operate on the SD or MMC card. Card cover SD or MMC Card slot . 2 . 2 www. energysistem. com USB Connection You could transmit MP3 files through USB port of your PC. (Refer to the manual of your PC for the information about hardware). Connect the bigger end of the cable to a USB Port of your PC, the smaller to the USB port of the DIGITAL AUDIO player. LCD Display Window will show "USB" Icon and PC Icon if connection is finished. If you have installed the attached software, the PC will automatically find the device when the DIGITAL AUDIO player is connected to the PC at the first time. If not, please install the manager software first. Conect PC USB port Conect MP3 Player USB port www. energysistem. com . 2 . 3 System Requirements It is important to install Digital Audio manager software before connecting Digital Audio player to PC. After putting the Installation CD into CD-ROM Drive, USB Driver is installed automatically. The Digital Audio manager software requires the following systems: ¤ IBM compatible personal computer ¤ Pentium 166 MHz MMX or faster ¤ Windows 98 SE, Windows ME, Windows 2000 or Windows XP ¤ USB Port ¤ 32MB RAM or more (64MB is recommended for Windows 2000) ¤ 20MB free hard-disk space or more ¤ 4 ¡ÁCD-ROM drive or more ¤ Sound Card (Optional) ¤ Accessible to Internet (Recommended) . 2 . 4 www. energysistem. com Installation of Manager Software Put the Installation CD into CD-ROM Drive and then it will be installed automatically. You should click the "Next" button on installation screens, and the Digital Audio Manager Software and USB Driver will be installed. [. . . ] 9. Some MP3 songs can not play in the player Now some MP3 songs use the MepgI Layer1 or Layer2 format compressing, but the player only support the MepgI Layer3 and WMA songs, the other songs maybe play natural but will exist some problem in it. So you try to compress the songs by Mepg I Layer3 format. MMC card when Power is on and restart your Digital Audio. . 4 . 0 www. energysistem. com Technical Spec Memory Size Memory Card LCD Size SNR Output Frequence Record Format Compress Rate Supported Music format 32MB/64MB/128MB/256MB SD or MMC 28*18Segment 79*62*18. 5(mm) 90dB 20Hz-20KHz ADPCM 32Kbps-256Kbps MPEG I layer III WMA www. energysistem. com . 4 . This product can not only work as a general earphone, but as a FM auto frequency modulation radio 2. [. . . ]