User manual ENERGY SISTEM MP3 ELEGANCE 4100 COMPACT

[. . . ] Please use provided format tool to format your MP3 player, it will not work if you use Windows format Tool. If you haven't installed the provided Digital Audio Management System, please use the "delete" command to the erase files in your player. The MP3 player will be damage if formatted under Window's format tool. When transferring files between your MP3 player and PC, please note the MP3 player's LCD display. [. . . ] Caution: To assure the compatibility, MMC card of SANDISK or SCANDISK is recommended. Card cover Card slot 86% &RQQHFWLRQ You could transmit MP3 files through USB port of your PC. (Refer to the manual of your PC for the information about www. energysistem. com 14 2. Connect the bigger end of the cable to a USB Port of your PC, the smaller to the USB port of the DIGITAL AUDIO player. LCD Display Window will show "USB" Icon and PC Icon if connection is finished. If you have installed the attached software, the PC will automatically find the device when the DIGITAL AUDIO player is connected to the PC at the first time. If not, please install the manager software first. System Requirements It is important to install Digital Audio manager software before connecting Digital Audio player to PC. After putting the Installation CD into CD-ROM Drive, USB Driver is installed automatically. The Digital Audio manager software requires the following systems: 4 IBM compatible personal computer 4 Pentium 166 MHz MMX or faster 4 Windows 98 SE, Windows ME, Windows 2000 or Windows XP 4 USB Port 4 32MB RAM or more (64MB is recommended for Windows 2000) 4 20MB free hard-disk space or more 4 4 h CD-ROM drive or more 4 Sound Card (Optional) 4 Accessible to Internet (Recommended) www. energysistem. com 15 Put the Installation CD into CD-ROM Drive and then it will be installed automatically. You should click the "Next" button on installation screens, and the Digital Audio Manager Software and USB Driver will be installed. It will remind you of restarting your PC when installation is finished. Click the Send button in the manager software. 4. The interface of transmission would be displayed. Caution: Do not pull out the USB cable or memory card while a file is being downloaded. Otherwise it will do harm to your Digital Audio. If the Digital Audio cannot work by accident, take out the battery and reinsert it after 3 seconds. It is not permitted to transmit music files for copyright protection. System would warn you t cannot be send if you select MP3 or WMA files. )RUPDWWLQJ WKH PHPRU\ RI 'LJLWDO $XGLR Before formatting, be sure that the Digital Audio is turned on and connected to PC. Run the management system of Digital Audio on the desktop. Click Format icon, the dialog box of format will pop up. www. energysistem. com 19 Select the disk symbol to be formatted from the Drive column. One represents the internal capacity of Digital Audio and the other represents the external MMC card. The first is your internal memory and the second your external disk l. [. . . ] Playing status is unstable after pulling up the MMC card. ·You may pull up the MMC card without shutting down the Digital Audio. ·You have to restart your Digital Audio to get steady playing status. · Because there are so many types of MMC cards that sometimes they are not compatible. [. . . ]