User manual ENERGY SISTEM MP3 ELEGANCE 4500 COMPACT

[. . . ] ENGLISH MP3 ELEGANCE COMPACT USER MANUAL V. 2. 0 www. energysistem. com . 1. Notice 1. Please use provided format tool to format your MP3 player, it will not work if you use Windows format Tool. If you haven't installed the provided Digital Audio Management System, please use the "delete" command to the erase files in your player. The MP3 player will be damage if formatted under Window's format tool. [. . . ] While MP3 is playing, press the A-B repeat button to designate the Start position. Press the A-B repeat button again at expected time to designate the End position; then the designated section will be repeated automatically. To release the repeated section, press the A-B repeat button or move to previous/next track. Designate the Start position A Designate the End position B . 2 . 0 www. energysistem. com SD or MMC Card You could use SD or MMC card to store more mp3 files. The player has to be turned off before inserting or removing an SD or MMC card. Inserting an SD or MMC card: 1 Turn the power off. 3 Insert the SD or MMC card into the slot following the arrow direction illus trated on the player. 4 Turning the power on, you could operate on the SD or MMC card. Card cover SD or MMC Card slot www. energysistem. com . 2 . 1 USB Connection You could transmit MP3 files through USB port of your PC. (Refer to the manual of your PC for the information about hardware). Connect the bigger end of the cable to a USB Port of your PC, the smaller to the USB port of the DIGITAL AUDIO player. LCD Display Window will show "USB" Icon and PC Icon if connection is finished. If you have installed the attached software, the PC will automatically find the device when the DIGITAL AUDIO player is connected to the PC at the first time. If not, please install the manager software first. . 2 . 2 www. energysistem. com System Requirements It is important to install Digital Audio manager software before connecting Digital Audio player to PC. After putting the Installation CD into CD-ROM Drive, USB Driver is installed automatically. The Digital Audio manager software requires the following systems: ¡Ñ IBM compatible personal computer ¡Ñ Pentium 166 MHz MMX or faster ¡Ñ Windows 98 SE, Windows ME, Windows 2000 or Windows XP ¡Ñ USB Port ¡Ñ 32MB RAM or more (64MB is recommended for Windows 2000) ¡Ñ 20MB free hard-disk space or more ¡Ñ 4 ¡ÁCD-ROM drive or more ¡Ñ Sound Card (Optional) ¡Ñ Accessible to Internet (Recommended) www. energysistem. com . 2 . 3 Installation of Manager Software Put the Installation CD into CD-ROM Drive and then it will be installed automatically. You should click the "Next" button on installation screens, and the Digital Audio Manager Software and USB Driver will be installed. It will remind you of restarting your PC when installation is finished. At last, "/Start/Program/Digital Audio Manager Software" is created in the Windows Menu, and the Digital Audio icon is also created on the Desktop window. . 2 . 4 www. energysistem. com How to use Digital Audio Manager Software First connect the Digital Audio and your PC with the USB cable. [. . . ] 9 Technical Specs Memory Size Memory Card LCD Size SNR Output Frequence Record Format Bit Rate Supported Music format 64MB/128MB/256MB SD or MMC 28*18Segment 79*62*18. 5(mm) 90dB 20Hz-20KHz ADPCM 32Kbps-256Kbps MPEG I layer III WMA . 4 . 0 www. energysistem. com Headphones. FEATURES: 1. This product can not only work as a general earphone, but as a FM auto frequency modulation radio 2. Can freely work on Mp3/PC/CD PLAYER/Wa1kman and other device, used as general earphone 3. [. . . ]