User manual ENERMAX REVOLUTION85PLUS

[. . . ] If you are uncertain whether or not your ENERMAX PSU is defective, please contact your dealer/reseller for support!Specifications are subject to change without prior notice. Actual product and accessories may differ from illustrations. omissions and printing errors excepted. [. . . ] Do not try by force to insert it nor modify the connectors. This might damage power supply and system components, and warranty shall be void. Following graphic illustrates the modular sockets layout and its DC rail distribution. 3V/5V/12V for modular cable to power drives or other peripheral. 12P RED sockets The red sockets provide 12V for modular cable to power graphics card, CPU or RAM. 4+4P (8P) CPU +12V, in split mode Native cable, 12V rail supplied 12V1 & V2 4-pin configuration supports certain single CPU systems. Some multi-CPU workstation/server system might also need this extra 4-pin 12V connector. Please use the connector with "12V" marking. 6+2P (8P) PCI Express, in combined mode Native cable, 12V rail supplied by 12V3 8-pin configuration supports latest extreme graphic cards, which require 8-pin PCI-E connector. 6+2P (8P) PCI Express, in split mode / 6P PCI Express Native cable, 12V rail supplied by 12V3 6-pin configuration supports most performance PCI-E graphic cards, which require 6-pin PCI-E connector. 4P Molex # 2 For IDE/SCSI/SAS drives or some AGP graphic card with traditional 4P power in socket. Normally, use either one of power connector to power the driver, BUT NOT BOTH! please check the drive's manual for details. #2 Some MB might require this connector to share the +12V current from 24-pin Mainboard connector to PCI-E slot. If your MB already supports 24-pin Mainboard connector, you may not need to add the 4P Molex connector on it. please check the MB's manual for details. #3 Most MB offer 2 ~ 4 3-pin system/PSU fan power sockets, but only one or two socket(s) might support the fan RPM signal. If you connect the PSU FM connector on the MB, but BIOS or system monitor software cannot read the PSU fan RPM, please relocate the PSU FM connector to another socket. Use ONLY genuine ENERMAX modular cables coming with ENERMAX PSU. Third party cables might not be compatible and might cause damage to your PSU and/or system, and use of third party cable shall void PSU warranty. [. . . ] Content of delivery might differ in different countries or areas. Some trademarks may be claimed as the property of others. Reproduction in any manner without the written permission of ENERMAX is strictly forbidden. Specifications are subject to change without prior noti ce. [. . . ]