User manual ENERMAX REVOLUTION87 ERV1000EWT-G 80PLUS GOLD

[. . . ] Specifications are subject to change without prior notice. Actual product and accessories may differ from illustrations. omissions and printing errors excepted. Content of delivery might differ in different countries or areas. [. . . ] When assembling or maintaining the system, please remove AC cord from AC inlet, or turn I/O switch into “O” position. CABLES & CONNECTORS All connectors are designed to prevent insertion in wrong orientation. If you cannot easily insert a connector, please check if you are inserting the connector in the right orientation. Do not try by force to insert it nor modify the connectors. This might damage power supply and system components, and warranty shall be void. Following graphic illustrates the modular sockets layout and its DC rail distribution. 4 (ERV550AWT-G / ERV650AWT-G) 5P BLACK sockets The black sockets provide 3. 3V/5V/12V for modular cable to power drives or other peripheral. 12P RED sockets The red sockets provide 12V for modular cable to power graphics card, CPU or RAM. (ERV750AWT-G / ERV850EWT-G / ERV1000EWT-G) 12P RED sockets The red sockets provide 12V for modular cable to power graphics card, CPU or RAM. ＊ 5P BLACK sockets The black sockets provide 3. 3V/5V/12V for modular cable to power drives or other peripheral. this product incorporates multiple 12V rails over current protection. If you let many peripherals consume the power on only one 12V rail, it may trigger the over current protection and shut down the system. Please re-direct certain peripheral power cable to other 12V rail to share the current loading to ensure highest stability and safety. 4+4P(8P) CPU+12V, in split mode Native cable, 12V rail supplied by 12V1 4-pin configuration supports certain single CPU systems. Some multi-CPU workstation/server system might also need this extra 4-pin 12V connector. Please use the connector with “12V” marking. 6+2P (8P) PCI Express, in combined mode 12V rail supplied by 12V4 on native cables (850/1000W) 8-pin configuration supports latest extreme graphic cards, which require 8-pin PCI-E connector. 6+2P (8P) PCI Express, in split mode / 6P PCI Express 12V rail supplied by 12V4 on native cables (850/1000W) 6-pin configuration supports most performance PCI-E graphic cards, which require 6-pin PCI-E connector. 4P Molex # 2 For IDE/SCSI/SAS drives or some AGP graphic card with traditional 4P power in socket. Normally, use either one of power connector to power the driver, BUT NOT BOTH! [. . . ] Turn I/O switch of power supply into “I” position, and reboot your system. Contact technical support of the respective manufacturer of the component which you think might be the cause to the problem. MB, GPU or PSU) If you have any question or need support, please contact your reseller or nearest ENERMAX subsidiary/agent or ENERMAX headquarter service center. Specifications are subject to change without prior notice. [. . . ]