User manual ENERMAX UCTA9N DATASHEET

[. . . ] Content of delivery might differ in different countries or areas. Some trademarks may be claimed as the property of others. Reproduction in any manner without the written permission of ENERMAX is strictly forbidden. Activated when output power > 110 ~160% of rated max load. [. . . ] If you want to add the UPS (Uninterruptible Power Supply) for your system, please choose adequate Watts/VA capacity UPS. * If you intend to add other appliance powered by the same UPS, such as monitor or printer, please use higher capacity UPS according to all connected devices' rated power draw. * Please do not mistake VA capacity as Watts, or use insufficient power UPS. This would result in less UPS battery runtime or the inability to power the system in battery mode. 8 This PSU does not support MB with ISA expansion slot, which might need -5V power. This PSU offers a special HeatGuard function. When the system is turned off, or goes into ACPI S3/S4 sleep mode, the PSU fan will keep dissipating the remaining heat for 30 ~ 60 seconds and prolonging system lifetime. #2 When assembling or maintaining the system, please remove AC cord from AC inlet, or turn ON/OFF switch into "OFF" position, and wait PowerGuard LED light off. All connectors are designed to prevent insertion in wrong orientation. If you cannot easily insert a connector, please check if you are inserting the connector in the right orientation. Do not try by force to insert it nor modify the connectors. Please visit our website for more information: www. Com Special note for System Integrators: If your system requires special modular cable configuration or design, please contact an ENERMAX sales representative. Then you can easily plug in the connector. Detaching the modular cable from PSU 5-pin / 12-pin connector on modular cable has two hooks to lock with the PSU's modular sockets. When unplug the modular cable from PSU, please press two hooks together and gently pull out the cable. Before booting your system, please check that: 1. All other needed connectors are properly connected. Turn on the PSU by switching the ON/OFF switch to "ON", and your system is ready. With tri-color LED, PowerGuard tells you the current PSU status. In case of abnormal situations, the power supply will automatically turn off to avoid potential danger to itself and other system components. If LED still does not turn to orange light, then - Contact ENERMAX service center. [. . . ] If you have any question or need support, please contact your reseller or nearest ENERMAX subsidiary/agent or ENERMAX headquarter service center. Specifications are subject to change without prior notice. Actual product and accessories may differ from illustrations. omissions and printing errors excepted. [. . . ]