User manual ENFACE ENVISION 220

[. . . ] Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes. [. . . ] The Intel(R) Matrix Storage Manager provides information on the RAID status. 7 - 6 Setting Up SATA RAID or AHCI Modes Modules Wireless LAN Module If you have included either an Intel PRO/Wireless 3945ABG (802. 11a/b/g) PCIe WLAN module, or 802. 11b/g USB WLAN module, in your purchase option the LED will be green. Install the driver as indicated below. WLAN Driver Installation 1. Insert the Device Drivers & Utilities + User's Manual CD-ROM (Win Vista) into the CD/DVD drive. Click Finish to complete the installation. The operating system is the default setting for Wireless LAN control in Windows Vista (see overleaf). 7 Wireless LAN Module 7 - 7 Modules Connecting to a Wireless Network 1. Click the taskbar wireless icon , and then click Connect to a network (or rightclick the icon , and then click Connect to a network). Figure 7 - 4 Taskbar Menus Click icon Right-click icon 7 Network and Sharing Center You can also use the Network and Sharing Center control panel in Windows (Network and Internet) to connect to any available wireless networks. 2. 3. In the Show list, click to choose Wireless from the drop-down menu. A list of currently available networks will appear. Figure 7 - 5 Connect to a Network 7 - 8 Wireless LAN Module Modules 4. Click a network, and then click Connect. If you do not see a network you want to connect to, click Set up a connection or network (a list of options will appear allowing manual searching, and creating a new network). Figure 7 - 6 Connecting 7 6. Move the cursor over the taskbar icon to see the connection status (see below). Figure 7 - 7 Connection Status Wireless LAN Module 7 - 9 Modules 7. Security Enabled Networks You should try to make sure that any network you are connecting to is a secure network. Connecting to unsecure networks may allow unauthorized access to your computer, documents, websites and files etc. To disconnect from the wireless network you can click the taskbar wireless icon , and then select Connect or disconnect to access the network menu, and click Disconnect (or right-click the icon , and then click Disconnect from). Click icon 7 Figure 7 - 8 Disconnecting Right-click icon 7 - 10 Wireless LAN Module Modules Bluetooth Module If you have included a Bluetooth module in your purchase option the be orange. LED will Bluetooth Driver Installation 1. Insert the Device Drivers & Utilities + User's Manual CD-ROM (Win Vista) into the CD/DVD drive. Click 3. Install Bluetooth Driver > Yes. Choose the language you prefer, and click OK. Click the button to accept the license agreement, and then click Next. Click Finish, and the BlueSoleil icon will appear on the desktop. You can configure the settings at any time by going to the IVT Corporation BlueSoleil - Main Window (Start > Programs/All Programs > IVT BlueSoleil > BlueSoleil), or by clicking the desktop icon . 7 Bluetooth Module 7 - 11 Modules User Guides & Help View the BlueSoleil User Guides from the Help Menu (or press the F1 key) in the IVT Corporation BlueSoleil Main Window control panel. 7 Click the Help menu and select Contents and Index. Look through Getting Started or select the appropriate User Guide from the Contents menu. Figure 7 - 9 BlueSoleil Main Window & Help 7 - 12 Bluetooth Module Modules Bluetooth Local Area Connection You can check the Bluetooth connection status from the Network and Sharing Center: 1. Use the Fn + F12 key combination to turn on the Bluetooth module. Run the IVT Corporation BlueSoleil program from the desktop icon or Start menu. [. . . ] Press Ctrl + i to enter RAID configuration menu. Select 1. Create RAID Volume and press Enter. Intel(R) Matrix Storage Manager option ROM v6. 0. 0. 1022 ICH8R wRAID5 Copyright (C) 2003-06 Intel Corporation. 4. ] Create RAID Volume Delete RAID Volume Reset Disks to Non-RAID Exit [ DISK/VOLUME INFORMATION ] RAID Volumes: None Defined Physical Disks: Port Drive Model 1 HDT722516DLA380 4 ST380811AS Serial # VDK71GTE17AH6K 5PS196TS Size 153. 4GB 74. 5GB Type/Status(Vol ID) Non-RAID Disk Non-RAID Disk [ ]-Select [ESC]-Exit [ENTER]-Select Menu Figure E - 33 - Intel(R) Matrix Storage Manager 3. Specify the RAID volume name and then press Tab or Enter to advance to the next field. [. . . ]