User manual ENGENIUS DURAFON 1X

[. . . ] Table of Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Battery Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the handset is not on the cradle, press any key (except END and the SILENT soft key) to answer. Notes: 1. The LCD displays the caller's Handset ID. You can press the SILENT if you choose to ignore the call. Unlike turning off the ringer the SILENT key operation is valid only for the current call. PA paging to Ext. The LCD shows the last phone number dialed. To dial this number, press DIAL (Left) soft key. Use Up or Down Arrow Key to scroll through the last 10 phone numbers dialed. [Note] Intercom numbers (Handset ID) are not stored in the last 10 numbers dialed log. When an incoming call arrives, the ringer will ring or vibrate unless the ringer has been turned off. If the handset is on the charger cradle (ringer will be temporarily switched to "Ring" if it has been set to "Vibrate"), lift the handset and start the conversation. If the handset is not on the cradle, press any key (except END, and the ~25~ Ending a Call To end a telephone or intercom call, press END key or place handset into charging cradle. Adjusting Receiver (Earpiece) Voice Volume 1. Voice volume can only be adjusted during a call. There are 6 levels of volume selections. 11 00:00:10 Volume:4 OPTION HOLD 3. The new setting remains effective for all future calls until changed. ~26~ Placing a Call On Hold 1. When a call is in progress, it can be put on hold by pressing the HOLD (Right) soft key. To return to the conversation, press "UNHOLD" 11 call arrives, press SILENT (Left) soft key. To prevent accidental dialing, you can press Menu (Right) soft key, then press "1" to select KeyGuard option. No key entry is accepted except the power on/off key. To unlock the keypad, press "UNLOCK" (Left) soft key, then, within 2 seconds, press the digit "1" to unlock. Key Guard is in effect until unlocked or powered off. [. . . ] Press "5" to change the power-up LCD display to show, e. g. , company name or other greeting message: (1) Use or to move the cursor backward or forward to insert (to the left of the cursor) or delete (the character above the cursor, or left of the cursor if cursor is on the right of the last character). (2) Enter characters using the Character Table and method discussed in the Phonebook section. (3) When finished; press SAVE to save change. 5. Press "4" to set sound-related settings: a. [. . . ]