User manual ENGENIUS ECB-3220

[. . . ] 11g Wireless Client Bridge/AP User's Manual Version: 1. 36 11g Wireless Client Bridge/AP Version 1. 36 Table of Contents 11g Wireless Client Bridge/AP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 a) b) FEATURES & BENEFITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] WPA Authentication Mode: Select the Enterprise (RADIUS) radio button. WPA/WPA2: Select TKIP or AES as the cipher suite. RADIUS Port: Enter the port number of the RADIUS server. RADIUS IP Address: Enter the IP address of the RADIUS server. RADIUS Password: Enter the shared password of the RADIUS server. Click on the Apply Changes button to confirm the changes. This device will automatically restart once these changes have been applied. 27 11g Wireless Client Bridge/AP Version 1. 36 4. 4. 4 Site Survey Click on the Site Survey link under the Wireless menu. This page displays the list of Access Points in the coverage area and allows you to connect to them if you have the required credentials. The site survey table lists the following: o SSID: This is the unique name of the wireless network. o BSSID: This is the MAC address of the Access Point. o Channel: This indicates the current channel that the Access Point is operating on, along with the 802. 11 network type (B, G, or B+G). o Encrypt: This indicates the encryption type. o Signal: This indicates the signal strength of the Access Point. You may select the radio button of a specific Access Point and then click on the Conenct button. If the credentials of this device match that of the Access Point that you will be connected immediately, if not, you must specify the appropriate credentials. You may click on the Refresh button at any time to re-scan the area. 28 11g Wireless Client Bridge/AP Version 1. 36 5 Access Point Mode ­ Web Configuration 5. 1 Logging In To configure the Access Point through the web-browser, enter the IP address of the Bridge (default: 192. 168. 1. 2) into the address bar of the web-browser and press Enter. Make sure that the Access Point and your computers are on the same subnet. Refer to Chapter 2 in order to configure the IP address of your computer. Log in User nameadmin; Passwordadmin After logging in you will graphical user interface (GUI) of the Access Point. The navigation drop-down menu on left is divided into three main sections: 4. Management: This includes operation mode, status, statistics, logs, upgrade firmware, save/reload settings, and password. TCP/IP Settings: This includes the configuration of the LAN port and settings for the LAN IP, subnet mask, DHCP client, spanning tree and MAC cloning. Wireless: This includes the basic, advanced, security and site-survey settings for 6. The Access Point status page is also displayed once you have logged in. [. . . ] Current WDS AP list: This table lists MAC addresses; you may delete selected MAC address or delete all the addresses from the table by clicking on the associated buttons. Click on the Apply Changes button to confirm the changes. This device will automatically restart once these changes have been applied. Click on the Set Security button to configure the security settings. 48 11g Wireless Client Bridge/AP Version 1. 36 Encryption: Select WEP 64bits, WEP 128bits, WPA (TKIP) or WPA2 (AES) from the drop-down list if your wireless network uses a specific encryption. [. . . ]