Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual EPSON ACTIONLASER 1500. We hope that this EPSON ACTIONLASER 1500 user guide will be useful to you.
Lastmanuals help download the user guide EPSON ACTIONLASER 1500.
Manual abstract: user guide EPSON ACTIONLASER 1500INSTALL GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] Go only as far as test printing; you will use the procedures in this guide to connect the Macintosh. Once you see that your printer operates properly, install Epson Talk as described below.
Installing the Interface Card
1. Make sure that both the printer and computer are turned off and that all power and interface cables are removed from the printer. [. . . ] 0 Do not use too muchforce when you insert and remove the card. Hold the card so that the arrow on the card is aligned with the arrow on slot A. (Do not use slot B. )
ActionLaser 1000/1500
EPL-8000
3. Gently but firmly slide the card into the slot as far is it can go. Turn on the printer and computer.
3
-
Selecting PostScript
You need to change the emulation or mode setting through SelecType before you can use PostScript. The SelecType instructions below enable you to assign PostScript quickly. If you need more detailed instructions on using SelecType, see your printer manual
Note:
Be sure to install the interface and PostScript cards first. Otherwise, the PostScript emulation or mode aloes not appear as a SelecType option on the printer display.
For the ActionLaser 1000 and 1500
1. Press the ON LINE button to take the printer off line. Press V until EMULATION appears on the display.
4. Press the EXIT button twice to return to the READY message.
Note:
The READY message may not show O PS (indicating the optional interface and PostScript) until after yourfirst print job is sent from your computer to the printer each time you turn on your printer.
10. Make sure that AppleTalk is active in the Chooser under the Apple menu on your Macintosh.
4
11. The name of your printer appears in the Select a LaserWriter box. Click on the name of your printer and then close the Chooser.
Note:
LaserWriter printer driver is not yet installed on your computer, you can find it on one of your Macintosh System disks. Follow your computer manual instructions to install it on your Macintosh.
If the
12. begin printing using your application software.
For the EPL-8000
you have an Epson EPL-8000 printer, you must have aj%mware version 22. 48 or later to use Epson Talk. [. . . ] Make sure that AppleTalk is active in the Chooser under the Apple menu on your Macintosh. EPL-8000 appears in the Select a LaserWriter box. Click on EPL-8000 and then close the Chooser.
Note:
the LaserWriter printer driver is not yet installed on your computer, you can find it on one of your Macintosh System disks. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE EPSON ACTIONLASER 1500
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual EPSON ACTIONLASER 1500 will begin.
EPSON ACTIONLASER 1500 SETUP GUIDE (166 ko)
