User manual EPSON ACULASER C2800

[. . . ] User's Guide NPD3059-00 AcuLaser C2800 Series User's Guide Copyright and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] Right-click your printer icon, then click Printing Preferences. Using the PostScript Printer Driver 138 AcuLaser C2800 Series User's Guide Making changes to PostScript printer settings You can change the PostScript printer settings in the PostScript printer driver. Online help is available to help you with the printer driver settings. Using online help If you want help on a particular item, click the "?" icon on the top-right corner of the dialog box's title bar, then click the name of the setting that you want more information on. An explanation of the setting and its options will be displayed. Using AppleTalk under Windows 2000 Use the following settings if your machine is running Windows 2000, and the printer is connected through an network interface using the AppleTalk protocol: Use SelecType to set the Emulation Mode-Network item to PS3. Using the default Auto setting will cause an extra, unneeded page to be printed. On the Device Settings sheet of the printer's Properties dialog box, make sure that SEND CTRL-D Before Each Job and SEND CTRL-D After Each Job are set to No. TBCP (Tagged binary communications protocol) cannot be used as the Output Protocol setting. On the Job Settings sheet of the printer's Properties dialog box, make sure to clear the Job Management On check box. Using the PostScript Printer Driver 139 AcuLaser C2800 Series User's Guide Using the PostScript Printer Driver with Macintosh Installing the PostScript printer driver Follow the steps below to install the PostScript printer driver. Note: Make sure that no applications are running on your Macintosh before installing the printer driver. For Mac OS X users Note: Make sure that Printer Setup Utility (for Mac OS X 10. 3 and 10. 4) or Print Center (for Mac OS X 10. 2) is not open. Insert the printer software CD-ROM into your CD-ROM drive. Double-click Mac OS X, then double-click PS Installer. Note: For Mac OS X 10. 2, if the Authenticate window appears, enter the user name and password for an administrator. The Install EPSON PostScript Software screen appears, click Continue, then follow the on-screen instructions. Easy Install is displayed on the screen. Note: For Mac OS X 10. 3 and 10. 4, if the Authenticate window appears, enter the user name and password for an administrator. When installation is done, click Close. Selecting the printer After installing the PostScript 3 printer driver, you need to select the printer. Using the PostScript Printer Driver 140 AcuLaser C2800 Series User's Guide Selecting a printer in a network environment If the printer is connected through the Ethernet interface or an optional network card. For Mac OS X users Follow the steps below to select the printer. Note: You cannot use FireWire for printer connection in the PostScript 3 mode. Although EPSON FireWire appears in the interface pop-up list, it cannot be used with the PostScript 3 printer driver. You need to make the settings for your installed options manually when the printer is connected using USB, IP printing, or Bonjour (Rendezvous). When the printer is connected using AppleTalk, the printer software automatically makes the settings. Make sure to specify ASCII as the data format in the application. Open the Applications folder, open the Utilities folder, then double-click Printer Setup Utility (for Mac OS X 10. 3 and 10. 4) or Print Center (for Mac OS X 10. 2). Select the protocol or the interface that you are using from the pop-up list. [. . . ] Gatot Subroto No. 2 Bandung Phone/Fax: (62) 22-7303766 Hitech Mall lt IIB No. Kusuma Bangsa 116 ­ 118 Surabaya Phone: (62) 31-5355035 Fax: (62)31-5477837 Hotel Natour Garuda Jl. 60 Yogyakarta Phone: (62) 274-565478 Wisma HSBC 4th floor Jl. 11 Medan Phone/Fax: (62) 61-4516173 MTC Karebosi Lt. [. . . ]