User manual EPSON ACULASER M7000N

[. . . ] User’s Guide NPD4502-00 EN Epson AcuLaser M7000 Series User's Guide Copyright and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. [. . . ] Note that not every message shown on the LCD panel indicates a problem. When the mark is displayed at the right of the warning message, multiple warnings have occurred. The LCD panel also displays the remaining service life of the consumables and available paper sizes. Bookmark Failed The selected menu cannot be registered as a bookmark. Some menus cannot be registered as bookmarks. Using the Control Panel 84 Epson AcuLaser M7000 Series User's Guide Bookmark Registered The selected menu is registered as a bookmark. Cancel All Print Job The printer is canceling all print jobs in the printer memory, including jobs the printer is currently receiving or printing. This message appears when Cancel All Jobs is selected on the control panel. Cancel Print Job The printer is canceling the specified print job and the current print job. This message appears when Cancel Job is selected after you specify the file to be canceled on the control panel. Cancel Print Job (by host) The print job is canceled at the printer driver. Can’t Print The print data is deleted because it is incorrect. Make sure the appropriate paper size and printer driver are used. Can’t Print Duplex The printer has encountered problems during duplex printing. Make sure you are using an appropriate type and size of paper for the duplex printing. The problem could also be a result of incorrect settings for the paper source you are using. Pressing the Start/Stop button will print the rest of the print job on only one side of the paper. To cancel the print job see “Canceling Printing” on page 96. Can’t Use Bookmark The registered menu cannot be used because the menu is disabled by changing any settings after registered the menu in bookmark. Check Paper Size The paper size setting is different from the size of paper loaded in the printer. Check to see if the correct size of paper is loaded in the specified paper source. Using the Control Panel 85 Epson AcuLaser M7000 Series User's Guide To clear this error, select Clear Warning from the control panel’s Reset Menu. See “How to access the control panel menus” on page 56 for instructions. Check Paper Type The paper loaded in the printer does not match the paper type setting in the printer driver. [. . . ] Always test samples of paper stock before purchasing large quantities or printing large jobs. Available paper types Paper type Plain paper Envelopes Description Weight: 64 to 90 g/m2 (Recycled paper is acceptable. *) No paste and no tape. (unless specifically designed for laser printers. ) The backing sheet should be covered completely, with no gaps between labels. Transparencies for color laser printers or copiers. Weight: 91 to 157 g/m2 Weight: 158 to 216 g/m2 Non coated Paper and ink of letterheads must be compatible with laser printers. Labels Epson Color Laser Transparencies Thick paper Extra thick paper Colored paper Paper with letterhead * Use recycled paper only under normal temperature and humidity conditions. [. . . ]