User manual EPSON B808392

[. . . ] ® Network Scan Server EPSON Network Image Express Card User's Guide All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. [. . . ] Enter your password (up to 20 characters) and then click OK. Follow the on-screen instructions. 2 3. Select the scanner you want to configure from the list and click Configure. Note: If the same scanner model name appears in the list, you can identify the scanners by checking their MAC addresses on the Network Image Express Card. You can search scanners in other zones just like computers by changing the zone setting. See the online help for more information. The Launch Browser button can be used only if a valid IP address is assigned to the scanner. The default IP address "192. 168. 192. 168" cannot be used on the network. Be sure to assign a valid IP address manually or by using the DHCP server. Click the TCP/IP tab. 28 Setting Up the Network Image Express Card 2 2 2 2 5. Select a method to specify the IP address. When you select Automatic, DHCP becomes available and assigns an IP address automatically. If you want to set the IP address manually, select Manual. Note: The network administrator must confirm any changes made to the IP address settings. When Automatic is selected, DHCP becomes available. To use the DHCP server, make sure it is installed on your computer and correctly configured. See your operating system's online help for detailed instructions. We recommend that you select Manual and enter an IP address. This is because if you select Automatic, the IP address of the Network Image Express Card changes every time you turn on the scanner so that you need to change the EPSON Scan setting accordingly. Setting Up the Network Image Express Card 2 2 2 2 2 2 29 English Note: Refer to the online help to learn about other functions of EpsonNet WinAssist. To access the online help, click the help button. 2 6. When setting the IP address using the ping command, select the Set using PING check box. Do not select it when setting the IP address with EpsonNet WinAssist/MacAssist/WebAssist; this prevents any unexpected changes of the IP address. [. . . ] Turn on your scanner. 4 4 4 4 4 4 4 4 4 4 Uninstalling Software Uninstalling EpsonNet WinAssist Windows Me/98/2000/NT 4. 0 1. Click Start, point to Settings, and then select Control Panel. Double-click the Add/Remove Programs icon. Select the utility you want to uninstall, and then click the Add/Remove button (Windows Me/98/NT 4. 0) or the Change/Remove button (Windows 2000). [. . . ]