User manual EPSON C82402

[. . . ] ® EpsonNet 10/100 Base Tx USB Print Server All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON product. EPSON is not responsible for any use of this information as applied to other products. [. . . ] The Install From Disk dialog box appears. Select the CD-ROM drive for Drives, and then double-click the WINNT40 folder. Click OK in the Install From Disk dialog box. Select the model name of the printer, and then click Next. Note: Announce the share name to your clients so that they know the share name of the printer they want to use. If the Add Printer wizard prompts you to select either Keep existing driver or Replace existing driver, be sure to select the Replace existing driver radio button. Click Finish and follow the on-screen instructions to complete the setup. When you print using Microsoft Network Shared printing in the Windows 2000/NT/XP environment, see "Using the NET USE command" on page 131 for more details. Installing the Printer Driver 130 Using the NET USE command If you are running Windows 2000/NT/XP and using NetBIOS to connect to the print server, we recommend that you use the NET USE command, as follows: 1. Check that the following services are installed. Right-click the Network Neighborhood icon on the desktop and select Properties. Click the Services tab and check that Server or Workstation is listed. Run the command prompt and enter the following command. NET USE printer port: \\NetBIOS name of print server\Device name of print server Selecting the port 1. Click Start, point to Settings, and then select Printers. Right-click the printer icon and then select Properties. Click the Ports tab and then select the port you have set with the NET USE command. Installing the Printer Driver 131 Macintosh Follow the steps below to set a printer. Note: Make sure that the printer driver is installed on your Macintosh before following the steps below. See the manual shipped with your printer for instruction on how to install the printer driver. AppleTalk printing 1. Close Chooser. Installing the Printer Driver 132 OS/2 This section explains how to configure and use the print server with an IBM OS/2 System, which includes OS/2 Warp3 and 4 (OS/2 Warp Connect and OS/2 Warp Server). LPR printing 1. Double-click the OS/2 system folder, then the System Setup folder, and then double-click the TCP/IP Configuration icon. 2. Click the Printing tab. Installing the Printer Driver 133 3. Enter the IP address of the print server in the Remote print server box and the name of the remote print server's printer in the second text box. [. . . ] You can check the brief information of the print server. To use this function, the Universal Plug and Play must be installed on Windows Me or future operating systems. For information on how to install Universal Plug and Play, see the Windows Me online help. Note: Before using the Universal Plug and Play function, you must set the Universal Plug and Play function to ON in EpsonNet WinAssist or WebAssist. [. . . ]