User manual EPSON C824345

[. . . ] Contents Introduction About Your Network Interface . . 18 Installing Components and Setting Up the Network Interface Overview . . 19 Selecting a Printing Method Printing from Windows . . 24 Installing Components on Your Computer About Installing Components on Your Computer. [. . . ] ("X" represents a number, either 0 or larger. ) Printer Share Name IPP You must make the following settings before setting up the device for Internet Printing on Windows XP/Me/2000/Server 2003 or using EpsonNet Internet Print on Windows 98/95/NT 4. 0. See "About EpsonNet Internet Print" for more information. Items IPP URL Explanations Displays the device's URL for Internet Printing. Format: http://IP address of network interface:631/printer name set below Example: http://192. 168. 100. 201:631/EPSON_IPP_Printer 111 Items Printer Name Explanations Enter the name of a device to use for Internet Printing (up to 127 characters). Example: EPSON_IPP_Printer Location Enter the name of the device's physical location (up to 64 characters). SNMP Community Items Community Read Only Read/Write Explanations Displays the community name. The word "public" always appears. Enter the Read/Write community name (up to 32 characters). IP Trap Items Trap Address Explanations Enables or disables the trap. Enter the IP address of the network interface to which the trap is sent. Enter the community name (up to 32 characters). Enter the port number of the receive host, in decimal (between 0 and 65535). Community Port Number 112 IPX Trap Items Trap Address Explanations Enables or disables the trap. Enter the network address and the node number (MAC Address) of the network interface to which the trap is sent. Format: Network Address: Node Number Suppose the network address is A7E00BB0 (hexadecimal) and the node number is 000048930000 (hexadecimal). In this case, the address is A7E00BB0:000048930000. Community Socket Number Enter the community name (up to 32 characters). Enter the socket number of the receive host, in hexadecimal (between 0 and FFFF). Printing Control Printing Control Settings Items Printing Control Printer Access Control Explanations Enables or disables the printing control. Selecting Allow permits the network access from the IP addresses registered on the printer access control list. On the other hand, selecting Deny blocks the network access from the IP addresses registered on the printer access control list. Enter the IP address ranges by which the network access is restricted. Printer Access Control List 113 Timeout Printing Items LPR(0-3600) Explanations Set the length of time for LPR before a timeout occurs (between 0 and 3600 seconds). Set the length of time for RAW(Port9100) before a timeout occurs (between 0 and 3600 seconds). Set the length of time for IPP before a timeout occurs (between 0 and 3600 seconds). Enter 0 not to apply the timeout. RAW(Port9100) IPP(0-3600) Time Items Time Explanations Displays the current time. Click the Get Time button to reload the display. When the time server is enabled, time is acquired from the time server. Manual Settings If the network interface has RTC (Real Time Clock), you can set the time manually. Items Date (YYYY-MM-DD) Time (HH:MM:SS) Explanations Enter the year, month, and day. Enter the hour, minutes, and seconds. 114 Items Time Difference (HH:DD) Explanations Enter the difference between time at the present location and Greenwich Mean Time (GMT). [. . . ] Note: You can also initialize the network interface using EpsonNet Config by clicking the Default Settings button. Restrictions on EPSON Status Monitor 3 The operation of EPSON Status Monitor 3 is different, depending on whether the printer or all-in-one is connected to the network interface for use in the wireless LAN environment or to the computer directly, as described below. For the laser printer For Windows XP Service Pack 2 Users If you share the laser printers on the computer running Windows XP Service Pack 2 on the network, client computers with the following conditions cannot monitor the printers using EPSON Status Monitor 3: Client computers running Windows Me/98/95 Client computers located in another network segment 215 Solution 1. Click Start, point to Control Panel, and then select Security Center. Click the Exceptions tab, and then click the Add Program button. Select the program located in the following folder, using the Look in pull-down menu. [. . . ]