User manual EPSON C824352

[. . . ] Print Server 5e No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] Select Enable to get a private address between 169. 254. 1. 1 and 169. 254. 254. 254 automatically when an IP address cannot be obtained by the DHCP server; otherwise, select Disable. Enables or disables IP address setting using the ping command. Subnet Mask Default Gateway Set Using Automatic Private IP Addressing (APIPA) Set Using PING DNS Server Address Settings Items Acquire DNS Server Address Automatically DNS Server Address Explanations Select either Enable or Disable to acquire the DNS server address from the DHCP server. When the DHCP server does not respond even if Enable is selected for Acquire DNS server address automatically, the DNS server address set here is used. Chapter 2 About the Software 110 Host Name and Domain Name Settings Items Acquire Host Name and Domain Name Automatically Host Name Explanations Select either Enable or Disable to acquire the host name and domain name from the DHCP server. Enter the host name supported by Dynamic DNS (between 2 and 63 characters). The total number of characters of the host name and the domain name must not exceed 251. Leave it blank or enter two or more characters of the domain name. The total number of characters of the host name and the domain name must not exceed 251. Select Enable if you want to send the host name and the domain name to the DHCP server that supports Dynamic DNS update to request for DNS dynamic updates. Select Enable if you want to directly send the host name and the domain name to the DNS server that supports Dynamic DNS update to request DNS dynamic updates. When Disable is selected for Register network interface Address to DNS server, this item is also disabled. Domain Name Register Network Interface Address to DNS Server Register Network Interface Address Directly to DNS Server Universal Plug and Play Settings Items Use Universal Plug and Play Device Name Explanations Enables or disables Universal Plug and Play. Enter the device name (between 2 and 63 characters). Chapter 2 About the Software 111 Rendezvous/Bonjour Settings Items Use Rendezvous Explanations Select either Enable or Disable to use Rendezvous/Bonjour. Enter the printer name for Rendezvous. Rendezvous Name Rendezvous Printer Name SLP Settings Items Use SLP Explanations Select either Enable or Disable to use the SLP function. Enter the number of routers through which a packet can travel before being discarded or returned when using the SLP function. If you do not want to use the TTL setting, enter -1. TTL (-1, 1-15) Chapter 2 About the Software 112 AppleTalk Items Use AppleTalk Printer Name Explanations Enables or disables AppleTalk. Enter the name of the device attached to the network interface (up to 32 characters). Enter the network zone name (up to 32 characters). To have the zone selected automatically, select Auto for the Network Number Set and enter an asterisk (*) in this text box. Do not change the entity type unless "epson" appears. If "epson" appears, enter an entity type to match your device. Enter the network number when you select Manual for Network Number Set. Zone Name Entity Type Network Number Set Network Number for Manual Mode(0-65534) MS Network Items Use Microsoft Network Shared Printing Host Name Workgroup Name Explanations Enables or disables the Microsoft network shared printing. Enter the host name (up to 15 characters). Enter the workgroup name or domain name (up to 15 characters). Enter the file share name (up to 12 characters). LPT "X" or COM cannot be used. [. . . ] After the initialization is complete, press the status sheet button to print a status sheet. Check the information on the status sheet. Note: You can also initialize the network interface using EpsonNet Config by clicking the Default Settings button. Restrictions on EPSON Status Monitor The operation of EPSON Status Monitor is different, depending on whether the printer or all-in-one is connected to the network interface for use in the wireless LAN environment or to the computer directly, as described below. For the laser printer For Windows XP Service Pack 2 Users If you share the laser printers on the computer running Windows XP Service Pack 2 on the network, client computers with the following conditions cannot monitor the printers using EPSON Status Monitor: Client computers running Windows Me/98/95 Chapter 4 Problem Solver 212 Client computers located in another network segment Solution 1. Click Start, point to Control Panel, and then select Security Center. [. . . ]