User manual EPSON D78 START HERE

[. . . ] Seiko Epson Corporation and its affiliates shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. NEST Office Kit Copyright © 1996, Novell, Inc. IBM and PS/2 are registered trademarks of International Business Machines Corporation. Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the United States of America and other countries. [. . . ] When the network interface is not correctly set Since access is made only to the primary server, no dial-up is generated. However, if the file server/print server of the remote network is erroneously set as the primary server, an unnecessary dial-up might be generated. Correct the settings to avoid this problem. During normal operation (standby/printing) Since access is made only to the primary server, no dial-up is generated. When the primary server is down during operation Connection to the primary server is periodically attempted, but no dial-up is generated. However, if the router is set to pass SAP packets (Find Nearest Server), an unnecessary dial-up might be generated. To avoid this, turn off the printer once, or do not allow the router to pass SAP packets (Find Nearest Server). For Users of Printers Not Supporting NetWare Queue-Based Printing This section explains how to configure the network interface for NetWare. To print in a NetWare environment, you need to use NDPS. First, install EpsonNet NDPS Gateway on the NetWare server, and then set a valid IP address to the network interface using EpsonNet Config. Note: Be sure to set a static IP address to the network interface. How To 95 EPSON Network Guide Introduction to NetWare settings Supported systems Server environment NetWare 5. 0/5. 1 (NDPS) NetWare 6. 0 (NDPS) Client environment The client environment must be supported by NetWare. The clients are able to use the printer driver mounted on the network interface. The following Novell Client is supported. Browse the Database Volume and select where you want the NDPS Manager database assigned. The NDPS Manager icon appears in the main browser window. Type LOAD NDPSM at the server console, and then select the NDPS Manager you have created. Creating a Printer Agent After creating an NDPS Manager, you can create Printer Agents, either public access printers or controlled access printers. The following are the features of public access printers and controlled access printers. Public Access Printers: NDPS printers that are available to all network users and not associated with an NDS object. Users can select and print to any public access printer they can view from their workstations. However, these printers do not take full advantage of services such as security and job event notification. Controlled Access Printers: NDPS printers that are added to the NDS tree by NetWare Administrator. They are only available to the workstation user through the NDS object list. These printers can take full advantage of the security and management features provided by NDS. How To 98 EPSON Network Guide Creating a Printer Agent automatically You can create a Printer Agent automatically. Only public access printers can be created in this way. [. . . ] Therefore, we recommend that you set a valid IP address for the network interface by using the one of the following methods. Set the IP address for the network interface manually. See the EpsonNet Config User's Guide for details. Specify the network interface by using the bind of DHCP function. [. . . ]