User manual EPSON EB-4955WU SPECIFICATIONS

[. . . ] All rights reserved. 2 Contents Copyrights and Trademarks Safety Instructions Important Safety Instructions . . 6 When choosing a place for this product . . 41 Using the paper basket and paper guides . . 42 Using Auto Take-up Reel Unit (For Epson Stylus Pro 9890/9908 only) . [. . . ] Many common printer problems can be identified by the lights and messages on the LCD panel. See the following messages to solve problems. Error messages related to paper Error messages PAPER OUT LOAD PAPER Description No paper is loaded in the printer. See "Using Roll Paper" on page 31 See "Using Cut Sheet Media" on page 38 The button has been pressed without paper set in the printer. The paper runs out while printing is in progress. PAPER RELEASED LOAD PAPER PAPER SKEW LOAD PAPER PROPERLY The paper presser is released. Press the button to release the paper presser, and then set the paper. Press the button to release the paper presser, and then remove the paper. Set the paper, and then press the button. It may not be printed in the printable area properly. Press the button to release the paper presser, and then load the paper straight. See "Using Roll Paper" on page 31 See "Using Cut Sheet Media" on page 38 PAPER SETTING ERROR CHECK THE PAPER SOURCE IN THE DRIVER SETTINGS AND LOAD PAPER CORRECTLY PAPER CUT ERROR REMOVE UNCUT PAPER The paper source selected in the printer driver and the printer's control panel do not match. Paper is not cut correctly. Check the Source setting in the printer driver and printer's control panel, and load the paper correctly. Press the button to release the paper presser, and open the front cover. The installed printer driver is not correct for the printer. Stop printing, and press the button to cancel the job and reset the printer. Then make sure that the installed printer driver is correct for the printer. Turn the printer off, and then restart the printer. Then, update the firmware using EPSON LFP Remote Panel 2 again. Turn the printer off, and after a while turn it on again. Stop printing, and press the button to cancel the job and reset the printer. Remove any object if it is obstructing the ink cover(s). Close the ink cover(s). 91 Epson Stylus Pro 9890/9908/7890/7908 User's Guide Problem Solver Error messages related to the maintenance Error messages PAPER SENSOR ERROR PRESS THE BUTTON LOAD THE CORRECT PAPER REFER TO THE MANUAL Description The loaded paper is not proper for the Print Head Alignment. What to do Press the button to clear the error. Press the button to release the paper presser, and then load the paper that matches with the media type selected for the Print Head Alignment. [. . . ] No party will be liable to any other for compensation, indemnity or damages of any sort solely as a result of terminating this License in accordance with its terms, and termination of this License will be without prejudice to any other right or remedy of any party. 13. Miscellaneous. 13. 1 Government End Users. The Covered Code is a "commercial item" as defined in FAR 2. 101. Government software and technical data rights in the Covered Code include only those rights customarily provided to the public as defined in this License. [. . . ]