User manual EPSON EH-TW 5500

[. . . ] About the Manuals and Notations Used Types of Manual The documentation for your EPSON projector is divided into the following two manuals. Refer to the manuals in the order given below. Safety Instructions/Support and Service Guide This manual contains information on using the projector safely, and also includes a guide for warranty service, and a troubleshooting check sheet. Be sure to read this manual thoroughly before using the projector. [. . . ] • Image signal, color mode, aspect and item name when memory settings are retrieved. • Messages such as when no image signals are being input, when an incompatible signal is input, and when the internal temperature rises. Display Background Displays a menu for selecting the screen status for when using the blank function or when no image signal is input. Startup Screen This sets whether the start-up screen (the image that is projected when projection starts) is displayed (On) or not displayed (Off). If you change the setting, the new setting will take effect after the power has been turned off and the cooldown period is complete. Input Signal Video Signal Component Change this setting depending on the type of signal that is being output from the video equipment that is connected to the [Component] input port. If "Auto" is selected, appropriate signal is automatically set. If colors appear unnatural even though "Auto" is selected, select appropriate signal name in the menu. Language This sets the display language for messages and menus. Reset Adjustment values for the "Settings" menu functions are returned to their default settings, except for the "High Altitude Mode", "Projection", "Component", and "Language". *1 The setting values are stored separately for each image source and signal type. 35 Configuration Menu Sets the signal format in accordance with the video equipment that is connected to the [Video] or [SVideo] input port. If set to "Auto", the video signal format is set automatically. If there is a lot of interference in the image, or if a problem such as no image being projected occurs even though "Auto" has been selected, select the correct signal format manually. Configuration Menu Functions "Memory" menu Load Memory This recalls the stored memory settings and your memory setting saved at "Save Memory". p. 24 Save Memory This can be used to save "Image" menu settings. p. 24 Erase Memory This is used to erase unwanted memory setting saved as "Memory9" and "Memory10". p. 25 Rename Memory This can be used to change the names of the memories from "Memory9" to "Memory10". You can rename so that its settings are easy to recognize. Either of the following two methods can be used to change a memory name. p. 25 • Select a new memory from the list and then rename it. • Select "Customized" and then enter a desired name. "Reset" menu Reset All This resets all configuration menu settings to their default settings. "Component" and "Language" in the "Settings" menu, and the settings of "Memory" menu are not returned to their default even if "Reset All" is executed. Reset Memory This resets (erases) all settings that have been made using the "Save Memory". A locked memory cannot be initialized. Reset Lamp Hours Clear the cumulative lamp operating time and reset to "0H". Perform this procedure when you replace the lamp. 36 Problem Solving Reading the indicators The projector indicates its status using the indicators. (the icon and the around the button) and (the icon) light and flash, and lights and flashes in red according to the current status. The following tables show what the indicators mean and how to remedy the problems that they indicate. * If all indicators are switched off, check that the power cable is connected correctly and that the main power switch is on. (operation) indicator (warning) indicator When the Red Red (warning) indicator is lit or flashing warning/problem : Lit : Flashing : Off Internal problem Red Fan problem / Sensor problem Disconnect the power cable from the electrical outlet. [. . . ] 28, 30 Top menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 32 Trigger Out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 34 [Trigger out] port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]