User manual EPSON EMP-1707 EMP MONITOR MANUAL

[. . . ] EMP Monitor V4. 21 Operation Guide Meanings of symbols used The following table shows the symbols used in this manual, along with descriptions of what they mean. CAUTION 1 Indicates something that may cause injury or damage to the projector. Indicates information that is related to a topic or which may be useful to know. Indicates a page where a related topic or a more detailed explanation is provided. Click on the page number to display that page. TIP [ (Name) ] Indicates the name of a projector port or a computer menu or item name. [. . . ] sp. 8 2 You can also carry out these operations by using the "Edit" menu. 2 If only the projector name has been changed, click [Search] in the "Edit projector" window that is displayed. If the IP address has been changed, enter the new IP address in the "IP address" box and then click [Search]. When the message is displayed, click [OK]. When the display returns to the "Edit projector" window, click [Change]. 3 Registering and deleting projectors for monitoring 16 Cancelling (deleting) projector registrations The registrations for projectors can be deleted if they are no longer required for monitoring or control using EMP Monitor. PROCEDURE Right-click the icon for the projector or group that is to be deleted in "Grouping view" or "Detail list view" and select "Delete". When the message is displayed, click [OK]. More than one projector can be selected for deleting by selecting in "Grouping view" or "Detail list view". The methods of selecting more than one projector at the same time are as follow. · If you select a group icon in "Grouping view", all projectors that have been registered in that group will be deleted at the same time. · Hold down the [Ctrl] key on the keyboard while clicking on the desired icons. · Use drag and drop to select a range of desired icons. TIP You can also carry out this operation by selecting "Delete" from the "Edit" menu. Monitoring window layout You can monitor using either of the window layouts below. · "Grouping view" This view lets you check the status of group registrations in a hierarchical diagram. · "Detail list view" This view lets you display the status of each projector as a list so that the projectors can be checked in detail. You can also display specific items as a list, and sort display items using a specific row as a sort key. 17 Monitoring using "Grouping view" f Meanings of "Grouping view" icons In "Grouping view", the patterns on the icons indicate the statuses of the projectors. . "Grouping view" "Grouping view" "Detail list view" If the group icons are round in shape, it indicates that there is another level below them. s p. 18 f How to switch views "Grouping view" and "Detail list view" are switched as follows. PROCEDURE Click the "View" menu, and select "Grouping view" or "Detail list view". Monitoring window layout The icon patterns and their meanings are explained below. Group No warnings or problems All projectors in the group are normal. Warning or problem A projector in the group has a warning or problem status. Notification A projector requiring immediate attention has been detected within the group. Monitoring disabled The projector is not being monitored. If you rightclick the icon and select "Monitoring enabled", the projector will be added to the projectors that are being monitored. Data being updated Projector No warnings or problems*1 Warning or problem Notification Monitoring disabled Data being updated Network error (monitor password authentication error) No Monitor Password was entered when the projector was registered, or an incorrect Monitor Password was entered. sp. 9, 11, 13 Network error (TCP connection error)*2 Network error (ESC/VP. net communication error)*3 18 *1 When "Temperature level display group view" is set to "On" at "Environment setup" in the "Tool" menu, an icon indicating the internal temperature of the projector will be displayed on top of the projector icon. As you can get an idea of how the temperature inside the projector is increasing when the internal temperature level is displayed, you can make improvements to the projector's operating environment before a high internal temperature alarm occurs or the temperature becomes abnormally hot. · Check that the projector's power is turned on. [. . . ] Is the projector's "Network In order to use EMP Monitor to monitor Monitoring" or "Standby and control the projector when it is in Mode" configuration menu standby mode, the projector's "Network set to "ON" or "Network Monitoring" or "Standby Mode" ON"?configuration menu must be set to "ON" or "Network ON". sProjector's User's Guide 33 An e-mail message is not sent when a problem occurs with a projector Cause Remedy Is the projector connected to Connect the network cable correctly. s"Network Cable Connections" in the projector's User's Guide Has the projector been set Check the settings for the "Network" up correctly for connection configuration menu command. [. . . ]