User manual EPSON EMP-1825

[. . . ] You should keep this Quick Reference Guide near the projector at all times and refer to it before starting presentations and while using the projector in order to check details of operation. Symbol Displays G Safety-related displays A variety of picture displays have been used in this manual and on the actual product to ensure that the projector is used correctly and safely in order to prevent risks to users and other people, and to prevent damage to property. Explanations for these displays are provided below. Ensure that they are fully understood before reading this manual. Displays details that may result in death or injury if ignored. [. . . ] The color, direction and width can be selected independently for each of the settings between 1 and 3. · The [4] button executes the bar function. The bar types will be switched between 1 and 3 sequentially for each time the [4] button is pressed. (see page 50) Selects the speed of Cursor. L: Slow M: Medium H: Fast Returns all effect menu adjustment values to the default values. Press the [Enter] button and then select [Yes] on the confirmation screen displayed. · Select [Reset All] to return all menu settings to the default settings. (see page 61) Adjusts trapezoid distortion. · The screen will be reduced in size when trapezoid correction has been performed. · The status of trapezoid correction will be recorded. Perform readjustments that match the installation position when the projection position or angle has been changed. Press the [Enter] button and select the required language from the language selection menu displayed. Displays the user logo during warm-up after the power has been switched on. · The user logo must be registered and set up before it can be amended. Adjusts the color temperature* of the image. Auto: Automatically adjusts the color settings. Manual: Press the [Enter] button and select the required item from the color setting menu displayed. · Set the color temperature value to the yardstick value. · The black level and white level settings are only used when multiple projectors are used in the stack formation. Default Value ON Reset - Capture User's Logo Capture EPSON logo Advanced Language English Startup Screen ON Color Setting Auto 60 - Menu Operations Top Menu Advanced Sub Menu Comp2 Sync Termination Function Sets the Computer 2 termination mode to enable image processing from a Port. ON: Terminated in analog (75) OFF: TTL input · Usually used at [OFF]. Set at on with the switcher when analog (75) termination is required. Set at [ON] to project images onto a half-transparent screen from the rear. [. . . ] : 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 Tel : 562- 290- 5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2. 909 Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name Type of Product Model : EPSON : LCD Projector : EMP- 8200/8200NL ELP- 8200/8200NL FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]