User manual EPSON EMP-30

[. . . ] 6 Getting Started Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Setup Special Notes on Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Setup Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (Example: When computer video is displayed, computer audio input is selected). Computer : Audio input from computer is selected. Video : Audio input from an A/V device is selected. Returns Audio menu settings to factory shipping values. * See page 52 for factory shipping values. To reset all menus to factory shipping values, use the Reset All menu. Tone Audio Input Reset 45 Effect Menu Displaying Menus Press the Menu button, use the Enter button to select "Effect" from the top menu displayed, and press the Enter button to move to a submenu. Settings Menu Cursor/Stamp Content Make detailed settings for the cursor/stamp function assigned to the remote control Effect1 button. Shape : Select the shape of the cursor/stamp. Zoom Rate : Select the display zoom factor for the cursor/stamp. Make detailed settings for the horizontal bar function assigned to the remote control Effect2 button. Color : Select the horizontal bar color. Width : Select the width of the horizontal bar from 2-20 dots (in 2-dot steps). - : Decreases color temperature (strengthens red). RGB: Adjusts red, green, and blue intensity. Select "RGB" and press the Enter button to create settings. This setting is used for projection from the rear of a screen. ON : Inverts a projected image vertically. This setting is used for projection with the projector hanging from a ceiling. ON : Inverts a projected image vertically and horizontally. Returns Advanced menu settings to their factory shipping values. * See page 52 for factory shipping values. To reset all menus to factory shipping values, use the Reset All menu. Color Setting Rear Proj. Ceiling Reset 49 About Menu Displaying Menus Press the Menu button, use the Enter button to select "About" from the top menu displayed, and press the Enter button to move to a submenu. Setting and Display Information The settings information displayed in the About menu differs as shown below during video projection from a computer/component versus a video device. Computer/Component Video Projection Video Projection D-Sub15: Computer/Component video Video: Video image Menu Lamp Reset Lamp Timer Video Source Input Signal Frequency Content Displays cumulative lamp-on time. Use this function when replacing the lamp. [. . . ] 8, 24, 25, 31, 54 Optional Accessories . . 34 77 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. [. . . ]