User manual EPSON EMP-5100

[. . . ] Important Information About Your EMP-7100/5100 Please read the following important information about your EMP7100/5100 projector. Important Safety Information Warning: Never look into the projector lens when the lamp is switched on as the bright light can damage your eyes. Never let children look into the lens when it is on. Warning: Never open any covers on the projector except the lamp and filter covers. Dangerous electrical voltages inside the projector can cause severe injury. [. . . ] Select [Custom] by using the Sync+/­ buttons on the projector or the Pointer on the remote control. Press [ (Enter)] or the Left/Right Click buttons on the remote control to call the Custom menu. Select the function you want to assign to the [Custom] button on the remote control. Press [ (Enter)] or the Left/Right Click buttons on the remote control to enter your selection. 42 3 · Using the Menus 8. [Presently Selected] will appear right next to the function you want to customize instead of [Select]. (If the function has been selected already, [Presently Selected] appears. ) 9. *If you want to change the function you customized, perform the above steps 1 to 8 again. Using the functions: * The [Volume], [Mute] and [Freeze] buttons are always available, even when you have customized the above functions. However, if you press any other button, its function has priority over the other buttons and the customized function is cancelled. * If "No Signal" appears on the screen or no supported signal is being entered, no function will work. Zoom 1. Press the [Custom] button on the remote control. Enlarges the displayed image +1. 25 times each time the [Left Click] button on the remote control is pressed. (An image can be enlarged up to four times. ) 3. Reduces it +0. 75 times each time the [Right Click] button on the remote control is pressed. (An image can be reduced up to one time. ) 4. If an enlarged image falls partly outside of the display area, it can be moved horizontally or vertically to adjust its position by using the [Pointer] on the remote control. The Zoom function is cancelled by pressing the [Custom] button on the remote control. (The image returns to previous size. ) Preview 1. Press the [Custom] button on the remote control. 4 seconds. ) Changing Menu Settings 43 3. The screen is divided into four quadrants, each of which shows the projection images currently being entered by each of the input sources. 4. The projection image is switched each time the [Right Click] button on the remote control is pressed. [. . . ] The balance of light and dark shades in an image. A type of video signal that encodes colors, luminance and sychronization information so it can be carried in one signal. A measure of the luminance differences between the highlights and shadows of an image. In a high-contrast image, light areas are very bright and dark areas are very dark. [. . . ]