User manual EPSON EMP-5500

[. . . ] DECLARATION of CONFORMITY/DICHIARAZIONE di CONFORMITÀ/ KONFORMITÄSERKLÄUNG/DECLARACIÓN de CONFORMIDAD/DECLARATION de CONFORMITE according to ISO/IEC Guide 22 and EN 45014/secondo la Guida ISO/IEC 22 e EN 450014/entsprechend ISO/ CEI Anleitung 22 und EN 45014/De acuerdo con ISO/IEC Guide 22 y EN 45014/selon les normes ISO/IEC Guide 22 et EN45014 Manufacturer/Produttore/Hersteller/Fabricante/Constructeur SEIKO EPSON CORPORATION Address/Indirizzo/Adresse/Dirección/Adresse 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan Representative/Rappresentante/Vertreten durch/Representante/Représentant EPSON EUROPE B. V. Address/Indirizzo/Adresse/Dirección/Adresse Prof. J. H. Bavincklaan 5 1183 AT Amstelveen The Netherlands Declares that the Product/Dichiara che il prodotto/Erklärt hiermit, daß das Produkt/Declara que el producto/Déclare que le produit Product name/Nome prodotto/Produktbezeichnung/Nombre del producto/Nom du produit LCD Projector Model name/Nome modello/Modellbezeichnung/Nombre del modelo/Nom du modèle EMP-7500/5550/5500 Conforms to the following directives and Norms/Conforme alle seguenti direttive e Norme/Erfüllt die folgenden Direktiven und Normen/De acuerdo con las directrices y normas siguientes/Conforme aux directives et normes suivantes Directive 89/336/EEC : EN 55022 Class B : EN 61000-3-2 : EN 61000-3-3 : EN 50082-1 Directive 73/23/EEC : EN 60950 July/Juli/Juillet/Juli/Luglio 1998 H. HORIUCHI President of/Presidente della/Der Generaldirektor von/Presidente de/Président de Directeur vanEPSON EUROPE B. V. Printed in Japan 7541689 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] While lifting the foot adjust lever, raise or lower the projector until the screen image is positioned correctly. Release the lever to lock the feet in their new position. To fine-tune the height of the projector, turn the rear feet clockwise to raise the height or anti-clockwise to lower it. ssss 26 Resize Button The Resize button lets you switch between Resize display and Window display. The Resize button cannot be used with XGA(1024 × 768 pixels) for EMP-7500 and SVGA(800 × 600 pixels) for EMP5550/5500. How to switch With images up to XGA(1024 × 768 pixels) size (for example a 600 × 480 pixels VGA image), press the Resize button alternately. The Resize display changes the VGA(600 × 480) image into the SVGA(800 × 600) image. The Window display projects the VGA(600 × 480) image as it is. The projected image gets smaller than SVGA(800 × 600) image. With images SVGA(800 × 600 pixels) size, the image is displayed with the maximum size in both Resize and Window display. Pressing the Resize button does not make any change. With images larger than SVGA(800 × 600 pixels) size (for example a 1024 × 768 pixels XGA image), you can either select to display a portion of the projected image (Window display) or the entire projected image (Resize display). Each time you press the Resize button, the projected image is displayed in the following order: 1. The XGA image is reduced to the SVGA size. The projected image is displayed with XGA size, and only the upper of the right image is projected on the screen. The upper of the left image is projected on the screen. The bottom of the right image is projected on the screen. The bottom of the left image is projected on the screen. The center of the image is projected on the screen. After the step 6, press the Resize button again to return to the step 1. ssssss Focusing and Positioning the Screen Image 27 Controlling the Projector You can use the operation panel on top of the projector or the remote control to perform the following actions: · Turn power on and off · Switch between input sources (video - computer) · Access the projector menus to adjust the image, audio, video, and display settings · Control resizing · Control display freeze · Control A/V mute (Cuts off the image and sound temporarily. ) · Adjust or mute audio output · Use custom functions (remote control only) · Use effect functions (for enhancing projected images on the screen; remote control only) ssss 28 Using the Remote Control Source Menu pointer button 2 1 Effects 3 4 5 AV/Mute top multi-purpose button Resize Custom bottom multi-purpose button Freeze Help - Volume + Power Remote control To use the remote control, point it towards the remote control receivers located at the front and back of the projector. To be able to use the remote control as a cordless mouse, connect the mouse cable (for PS/2) to the projector and your computer. You can use the remote control up to 10 metres (33 feet) from the projector. Note: The projector may not respond to remote control commands in these conditions: ambient light is too bright; a certain type of fluorescent light is present; a strong light source (such as direct sunlight) shines into the infrared receiver; or other equipment emitting infrared energy is present (such as a radiant room heater). Correct these conditions to use the remote control or control the projector from a computer. [. . . ] A measure of the luminance differences between the highlights and shadows of an image. In a high-contrast image, light areas are very bright and dark areas are very dark. A 525-line video broadcast format developed by the National Television Standards Committee. NTSC is widely used in North America, Mexico and Japan. [. . . ]