User manual EPSON EMP-74L

[. . . ] Example: [InputA] [Start] Indicates that the explanation continues on the following page. Clicking this symbol will display the following page. Indicates that the explanation is continued from the previous page. Clicking this symbol will display the previous page. Contents Meanings of symbols used Tasks that can be done using EMP Monitor Operating environment 1 4 5 2 If the projector name or IP address changes after registration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] A "Parent group" can be set for other parent groups, so that a hierarchical group arrangement such as the following can be created. Branch A Showroom Showroom A No1 No2 No3 Showroom B Lobby Convention hall Projector01 Projector02 Branch B Conference room 100 101 102 103 Room 1 Room 3 201 202 No4 No5 TIP "Password" and "Monitor" can be set once searching for the projector to be registered is complete. 4 After entering the details, click [Register] to start the registration. When the message is displayed, click [OK]. The registered projectors will be displayed in "Main View" using the icons that were selected previously in the "Manual registration" window. Reception room Branch C Conference room First, create the registration groups, and then register projectors into the groups that have been created. Registering and deleting projectors for monitoring 13 PROCEDURE 2 1 Right-click in "Main View" and select "New" "Group". Make the necessary settings while referring to the table below. After entering the details, click [Register] to start the registration. When the message is displayed, click [OK]. A group icon will be displayed in "Main View". Right-click the icon that is displayed in "Main View" for the projector that is to be registered in the created group, and then click [Edit]. TIP 3 You can also carry out this operation by selecting "Edit" from the "Edit" menu. 4 Group name Enter the group name to be displayed in "Main View". Up to a maximum of 32 bytes can be entered. A space cannot be used as the first character. Select the icon to be displayed in "Main View". It cannot be selected if no groups have been created. sp. 8, 10, 12 Monitoring disabled The projector is not being monitored. If you rightclick the icon and select "Monitoring enabled", the projector will be added to the projectors that are being monitored. Data being updated Network error (TCP connection error)*1 Network error (ESC/VP. net communication error)*2 *1 Check the following items. · Check that the projector's power is turned on. · Check that the LAN cable is connected. · Check that "Network Monitoring" is set to "ON" and "Standby Mode" is set to "Network ON" on the projector. *2 Check that the projector has been correctly connected to the network. f Using the icons in "Main View" The following icon operations can be carried out in "Main View". · Expanding and collapsing icons Each time you double-click a group icon, the icons for the projector that have been registered in that group are displayed or hidden. · Moving icons To change the position of an icon within "Main View", simply drag and drop the icon to be moved. · Searching for desired icons If several groups and projectors have been registered so that it is difficult to find the desired icon, use the following operation to retrieve "Show Projector List". Select "View" menu - "Show projector list view" TIP The projector information that is generated when a problem is detected is stored until EMP Monitor is closed. [. . . ] Single-byte alphanumeric characters can be used. Troubleshooting Projectors cannot be monitored or controlled Cause Remedy Is the projector connected to Connect the network cable correctly. s"Network Cable Connections" in the projector's User's Guide Has the projector been set Check the settings for the "Network" up correctly for connection configuration menu command. sProjector's User's Guide Has EMP Monitor been Uninstall EMP Monitor and then re-install installed on the computer it. Are all the projectors that Register the projector in "Main View". [. . . ]