User manual EPSON EMP-8200

[. . . ] Before use Installation Connections Projection Useful Functions Adjustments and setting Using the projector software Troubleshooting Maintenance Others Accessory Verification Check to confirm that the following items are included in the package when removing the projector and accessories from the box. Contact your dealer if any items are found to be missing. · Projector Lens cover with string · Remote control · Two alkaline dry cells for the remote control · Power cord · Computer cable (mini D-Sub 15-pin/mini D-Sub 15-pin) · Computer cable (mini D-Sub 15-pin/5BNC) · Audio cable · RCA video cable (Yellow) · RCA audio cable (Red/White) · Main cable · USB mouse cable · PS/2 mouse cable PS/2 MOUSE · Serial mouse cable SERIAL MOUSE · Mac mouse cable MAC MOUSE · Mac serial cable MAC SERIAL · PC serial cable PC SERIAL · Projector software CD-ROM S E RI AL MO US E · Safety Instructions/World-Wide Warranty Terms · Owner's Manual (this document) · Quick Reference Guide About the Manuals and Notations Used Types of Manual The documentation for your EPSON projector is divided into the following three manuals. The manuals cover the following topics. Safety Instructions/World-Wide Warranty Terms This manual contains information on using the projector safely, and also includes WorldWide Warranty Terms and a troubleshooting check sheet. Be sure to read this manual thoroughly before using the projector. Owner's Manual (this manual) This Owner's Manual contains information on installing the projector, basic operation, using the projector menus, troubleshooting and maintenance. Quick Reference Guide Contains an overview of the most commonly-used projector functions for easy reference. [. . . ] · The screen will be reduced in size when trapezoid correction has been performed. · The status of trapezoid correction will be recorded. Perform readjustments that match the installation position when the projection position or angle has been changed. · Reduce the sharpness if blurring occurs after trapezoid correction. (see page 57) Sets the input source for the P in P function's sub-screen. · The P in P function is executed by pressing the [P in P] button. (see page 51) The status for [No Image Signal Input] and other message display. · The user logo must be registered and set up before it can be amended. Sets whether to display the input source on the screen or not. Sets up the screen status for when the [A/V Mute] button is pressed. · The user logo must be registered and set up before it can be amended. Sets the mode for the input image signals connected to the BNC port. YCbCr: Enables video signals to be input (YCbCr or YPbPr. ) Default Value Individual settings between types 1 to 3 Cursor Speed Reset M - Setting Keystone Center value P in P Composite No Signal Msg Blue Prompt A/V Mute ON Black BNC RGB Menu Operations - 59 Top Menu Setting Sub Menu Sleep Mode Function Sets the energy-saving function for when no image signals are being input. When this is set at [ON], projection will be automatically ended and the projector will enter the sleep mode if no image signals are input and no operations are performed for a period of thirty minutes (the operation indicator will be illuminated in orange). Press the [Power] button to restart projection. Returns all setting menu adjustment values to the default values. Press the [Enter] button and then select [Yes] on the confirmation screen displayed. · Select [Reset All] to return all menu settings to the default settings. (see page 62) Press the [Enter] button and follow the instructions displayed on the confirmation screen. · The saving procedure requires a certain amount of time to complete. Do not attempt to operate the projector or the equipment connected to the projector while this procedure is running. Failure to observe this may result in damage. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. [. . . ]