User manual EPSON EMP-9300

[. . . ] EMP Monitor V4. 02 Operation Guide Meanings of symbols used The following table shows the symbols used in this manual, along with descriptions of what they mean. CAUTION 1 Indicates something that may cause injury or damage to the projector. Indicates information that is related to a topic or which may be useful to know. Indicates a page where a related topic or a more detailed explanation is provided. Click on the page number to display that page. TIP [ (Name) ] Indicates the name of a projector port or a computer menu or item name. [. . . ] Select this to monitor all projectors that have been registered in the group. If this is not selected, the settings made when the individual projectors were registered will be used. It cannot be set when creating a new group. In the "Edit projector" window, select the group name to use for registering in "Parent group" and then click [Change]. The status of the group registration will be displayed as an icon in "Main View". TIP Display icon Parent group Monitor The registration details can also be checked using "Show projector list view" in the "View" menu. TIP You can also carry out this operation by selecting "Group" from "New" in the "Edit" menu. Registering and deleting projectors for monitoring 14 If the projector name or IP address changes after registration f For projectors that have been registered manually PROCEDURE f For projectors that have been registered using automatic search PROCEDURE 1 2 In "Main View", delete the projector that has been changed. sp. 15 Carry out automatic search once more to re-register the projector. sp. 7 1 Right-click the desired projector icon that is displayed in "Main View" and select "Monitoring disabled". Then right-click the projector icon again and select "Edit". TIP You can also carry out these operations by using the "Edit" menu. 2 If only the projector name has been changed, click [Search] in the "Edit projector" window that is displayed. If the IP address has been changed, enter the new IP address in the "IP address" box and then click [Search]. When the message is displayed, click [OK]. When the display returns to the "Edit projector" window, click [Change]. 3 Registering and deleting projectors for monitoring 15 Cancelling (deleting) projector registrations The registrations for projectors can be deleted if they are no longer required for monitoring or control using EMP Monitor. PROCEDURE Right-click the icon that is displayed in "Main View" for the projector or group registration that is to be deleted, and then click [Delete]. When the message is displayed, click [OK]. More than one projector can be selected for deleting in "Main View" at the same time. The methods of selecting more than one projector at the same time are as follow. · If you select a group icon, all projectors that have been registered in that group will be deleted at the same time. · Hold down the [Ctrl] key on the keyboard while clicking on the desired icons. · Use drag and drop to select a range of desired icons. TIP You can also carry out this operation by selecting "Delete" from the "Edit" menu. Monitoring window layout Monitoring using "Main View" f Meanings of "Main View" icons The registered projectors and groups are displayed as icons in "Main View", and the patterns on the icons indicate the statuses of the projectors. The icon patterns and their meanings are explained below. Group No warnings or problems All projectors in the group are normal. Warning or problem A projector in the group has a warning or problem status. Monitoring disabled The projector is not being monitored. If you rightclick the icon and select "Monitoring enabled", the projector will be added to the projectors that are being monitored. Data being updated 16 "Main View" If the group icons are round in shape, it indicates that there is another level below them. s p. 17 Monitoring window layout 17 Projector No warnings or problems Warning or problem Password error No password was entered when the projector was registered, or an incorrect password was entered. [. . . ] you want to control or sp. 6 monitor registered in "Main View"?Is the projector's "Network In order to use EMP Monitor to monitor Monitoring" or "Standby and control the projector when it is in Mode" configuration menu standby mode, the projector's "Network set to "ON" or "Network Monitoring" or "Standby Mode" ON"?configuration menu must be set to "ON" or "Network ON". sProjector's User's Guide 29 An e-mail message is not sent when a problem occurs with a projector Cause Remedy Is the projector connected to Connect the network cable correctly. [. . . ]