User manual EPSON EMP-TW10H

[. . . ] Please be kindly noted that there are other methods to add the software to firewall exception list other than the method described in this manual. Also, the description about change in firewall setting in this manual is just an example setting to use the software (EMP NS Connection and EPSON Quick Wireless Connection). [. . . ] This is not the security level Epson recommends and assures. We would appreciate it if users could set up security level in accordance with their environment. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions. SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. In case of EMP-1705/1715/1815In case of EMP-1825, EB-5150/5350/1725/1735W 5 SEIKO EPSON 6. Make sure that EMP NS Connection's Permissions status is set to Full Access in the Program Permissions list. When using the moving sending mode, the following pop-up windows are displayed. In case of EMP-1705/1715/1815In case of EMP-1825, EB-5150/5350/1725/1735W 7 Restart EMP NS Connection. 6 SEIKO EPSON Connecting the projector to Windows XP using Quick Wireless Connection 1. Click Start > All Programs > McAfee > McAfeeSecurityCenter 2. Select Internet&Network in the main screen. Then click Configure shown in the lower right corner. 7 SEIKO EPSON 3. Make sure that Security Level is set to Standard and close the window. 8 SEIKO EPSON 5. When the following pop-up window is displayed at the first start of the Quick Wireless Connection, select Grant access. 6. Make sure that EPSON Quick Wireless Connection's Permissions status is set to Full Access in the Program Permissions list. 7. [. . . ] Make sure that Security Level is set to Standard and close the window. 8 SEIKO EPSON 5. When the following pop-up window is displayed at the first start of the Quick Wireless Connection, select Grant access. 6. Make sure that EPSON Quick Wireless Connection's Permissions status is set to Full Access in the Program Permissions list. 7. [. . . ]