User manual EPSON EPL-N3000DT NETWORK GUIDE

[. . . ] ® Color Laser Printer All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. [. . . ] Double-click the Print Server Object icon in the NetWare Administrator screen. 11. In the Print Server dialog box that appears, click Assignments and then click Add. 146 Settings for NetWare Server 12. From the printer object list, select the printer object you want to assign and click OK. Go back to the screen in step 11, and click the Printer Number button to set the printer number from 0 to 254. 6 6 6 6 14. To confirm the objects you have assigned, double-click the Print Server object icon. Click Print Layout, and check that the print server, printer, and print queue are connected. 6 6 6 6 6 6 6 6 Configuring for NetWare using EpsonNet WinAssist 1. Load the print server from the file server's system console which the print queue volume is set. >LOAD PSERVER print server name you set using NWAdmin 3. Configure the print server using EpsonNet WinAssist. See "NetWare" on page 63 for details. If you use the NetWare objects that are already created, you can use EpsonNet WebAssist too. See "NetWare" on page 223 for details. Settings for NetWare Server 147 Using the EpsonNet NDPS Gateway This section contains instructions on printing using Novell Distributed Print Services® (NDPS®) with Novell® NetWare® 5. x/6. 0. Novell Distributed Print Services (NDPS) is the new generation print services of NetWare. Note: Banners cannot be printed with NDPS. The Status Monitor 3 utility cannot be used with NDPS. Bind the IP or both IP or IPX protocols on the NetWare server that runs NDPSM. NLM and EPSONGW. NLM. Check the following points before starting. Install the appropriate client software, such as Novell Client for Windows 95/98/Me version 3. 3 or Novell Client for Windows NT/2000 version 4. 8, on client workstations. When you use the print server with Bindery (either in the Print Server mode or the Remote Printer mode), you need PCONSOLE. EXE to create bindery objects such as Print Server and Print Queue objects. Since PCONSOLE. EXE does not come with NetWare 5. x/6. 0, you need to get the file from Novell. Outline of settings The followings are basic steps to use the print server with the NDPS printing system. Detailed procedures are described in the subsequent sections. Install the EpsonNet NDPS Gateway. 148 Settings for NetWare Server 2. [. . . ] Set the exclusive address of the DHCP function. Note: Use NetBEUI printing if you do not want to go through these steps. See the manual of the Dial-Up router for more information on scorp range, bind, exclusive address of the DHCP function. Function of Universal Plug and Play When you connect your printer to the network, the printer is automatically assigned with an IP address, and the printer's icon appears in the My Network Places folder. By double-clicking the printer's icon, you can access EpsonNet WebAssist for basic information about the printer, such as manufacturer, model name, location, and administrator's name. [. . . ]