User manual EPSON EPSONNET 802.11B/G WIRELESS AND 10/100 BASE TX EXT. PRINT SERVER

[. . . ] EpsonNet 802. 11b/g Wireless and 10/100 Base Tx Ext. Print Server No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. [. . . ] Select Microsoft TCP/IP Printing from the list and then click OK. 17 If the TCP/IP protocol is in the list: Double-click TCP/IP Protocol in the list to open the Microsoft TCP/IP Properties dialog box. Set the IP address, the subnet mask, etc. From the Apple menu, select System Preferences. Select Built-in Ethernet from the Show pull down menu. Assign an IP address and other settings if necessary. Click the Apply Now button to save any changes. Mac OS 9 1. From the Apple menu, select Control Panel, and then TCP/IP. Assign an IP address and other settings if necessary. Close the dialog box to save any changes. Configuring the network interface Follow the steps below to connect the network interface to the network. Note: Make sure that the device driver is installed on your computer before following the steps below. See the manual shipped with your device for instructions on how to install the device driver. 18 You have to install EpsonNet Print for the Windows Me/98 environment beforehand. See the online User's Guide for more information about the installation procedure. Be sure to restart the computer after installing the software. Depending on the settings of the network interface, some dialog boxes in the following steps may not be displayed. Insert the Software CD-ROM into the CD-ROM drive. Windows If the Installer dialog box does not appear automatically, double-click EPSetup. exe on the CD-ROM. Macintosh If the Installer dialog box does not appear automatically, double-click the EPSON CD-ROM icon on the desktop, and then double-click the appropriate OS icon in the EPSON folder. Read the license agreement, and then click Agree. Select Network Interface Settings, and then click Next. Note: You can display the online help for the settings of each screen by pressing the Help button. Help button 6. Select the setting method for the computer and network interface, and then click Next. Note: You can select Set by AOSS only when you use an access point manufactured by Buffalo, Inc. Follow the instructions on the screen to connect the cable to the network interface and then to turn it on. Note: If the Windows Security Alert screen appears, click the Unblock button; otherwise the device is not listed on the screen of Easy Install. [. . . ] Connected to the computer directly Connected to the wireless LAN 43 Error for paper-out or paper jammed When the paper has run out or is jammed, the Continue button appears if the printer or all-in-one is connected directly to the computer. However, this information does not appear if the printer or all-in-one is connected to the wireless LAN. Follow the on-screen instructions to clear the error. Connected to the computer directly Connected to the wireless LAN 44 Ink replacement utility If the printer or all-in-one is connected directly to the computer, the Ink Replacement Utility dialog box appears when the ink has run out. [. . . ]