User manual EPSON EXPRESSION PREMIUM XP-710

[. . . ] Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product. SEIKO EPSON CORPORATION and its affiliates shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. EPSON is a registered trademark of SEIKO EPSON CORPORATION. IBM and PS/2 are registered trademarks of International Business Machines Corporation. [. . . ] Installation of EPSON TWAIN Pro Network is complete. Calibrating Your Screen You need to calibrate your screen so that scanned images will be reproduced on the screen as closely as possible to the original. During the installation of EPSON TWAIN Pro Network software, the calibration utility automatically starts and you can calibrate your screen at that point. To manually start the calibration utility, follow the instructions for your system shown below. For Windows 2000 or Windows 98 users: Click Start and point to Settings, then select Control Panel. Then double-click the Scanners and Camera icon. Select EPSON Expression 1640XL from the list when the Scanners and Cameras Properties dialog box appears, then click the Properties button. When the EPSON Expression 1640XL Properties dialog box appears, click the Utility tab and then the Screen Calibration Utility button. For Windows 95 or Windows NT 4. 0 users: Click Start and point to Settings, then select Control Panel. Then double-click the EPSON TWAIN Pro Network icon and click the Calibration Utility button in the EPSON TWAIN Pro Network Setup dialog box. For Macintosh users: Open the EPSON Network Scanner folder and double-click the EPSON Screen Calibration utility icon. The Screen Calibration dialog box appears. 1-24 Installing the Software To calibrate your screen follow the steps below: 1. Move the slider to the right or left until the shades of gray of the two sets of horizontal stripes match. 1 Note: View the screen from a slight distance. The gray stripes will not blend together perfectly; the objective is to make adjustments until the different tones match as closely as possible. Click OK to register the calibration setting. You will not need to change the screen calibration again as long as you continue to use the same monitor. Installing the Software 1-25 Chapter 2 Network Scanning Basics Network Scanning Procedure . For details on how to choose the correct settings, refer to "Understanding EPSON TWAIN Pro Features" in the EPSON Online Expression 1640XL Scanner Software Reference Guide. Network Scanning Basics 2-5 Scanning an Image To use network scanning, all of devices (the EPSON scanner, the scanner server, and the client) must be on and EPSON Scan Server, a TWAIN-compliant application and EPSON TWAIN Pro Network must be started. There are several ways to begin scanning a document. The basic method is to click the Scan button on the EPSON TWAIN Pro Network dialog box on the client. You can also start scanning by pushing the Start button on the EPSON scanner or by clicking the Start button on the EPSON Scan Server dialog box. a Using the EPSON TWAIN Pro Network dialog box on the client computer 1. Place the document on the document table, or a stack of documents in the Automatic Document Feeder. Start EPSON TWAIN Pro Network from a TWAIN-compliant application and choose the appropriate settings for your document in the EPSON TWAIN Pro Network dialog box on the client PC. If you use an optional Automatic Document Feeder or Transparency Unit, remember to select the appropriate setting for the Document Source. If necessary, click Preview and check the scanned image in the preview window. 2-6 Network Scanning Basics 3. Click Scan or Scan All in the EPSON TWAIN Pro Network dialog box. Scan All is available only if you have drawn more than one marquee in the preview window. 2 Scanning starts and the Progress bar indicates how much of the document has been scanned. Note: t To cancel scanning, click Cancel on the Progress bar. [. . . ] The TCP/IP Properties dialog box appears. 3. The IP Address dialog box appears on the top. A-14 Scanner Server PC Setup 4. If you are using a DHCP server in your network, you can assign an IP address to your scanner server PC automatically by selecting Obtain an IP address automatically and clicking OK. To manually assign an IP address, select Specify IP address then enter the IP Address and Subnet Mask. [. . . ]