User manual EPSON EXPRESSION PREMIUM XP-810

[. . . ] If you're using a transparency unit or automatic document feeder, remove it and replace the scanner cover. Turn on the scanner and wait until the carriage moves to the home position as shown. Slide the transportation lock at the back of the scanner to the position. O O N = on, O = off, F = flashing Scanner buttons Button Function Turns the scanner on and off. Resets the scanner to its default settings after an error. [. . . ] Then turn the transportation lock counterclockwise to the position. If you are using a transparency unit and it is switched on, the scanner carriage will not move to the home position. Remove the transparency unit first, then perform the steps above. 4 - EPSON Expression 1640XL 8/00 EPSON Expression 1640XL 5. Click the Preview button. Scanning with EPSON TWAIN Pro 1. Start your host application (for example, Adobe Photoshop LE). (Unless you change your source, you only need to do this step once. ) For example, if you're running Windows and using Adobe Photoshop LE as your host application, click File, Import, Select TWAIN_32 Source. In the Select Source dialog box, select EPSON TWAIN Pro(32-bit). If you have a Macintosh, click File, Import, Twain Select. In the Select a source dialog box, choose EPSON TWAIN Pro and click OK. The command you choose from the File menu differs from one host application to another. With other host applications, you might choose Acquire or Select Source instead of Import. Click to define the scan area automatically A dotted marquee frames the area to be scanned 3. Open the scanner software. You see a preview of your scan in the window that opens. Click the Auto Locate button to automatically define the scan area around the edges of your image. t If you want to scan more than one image, place your second image on the document table and press the scanner's ] Start button again. Repeat this step for every image you want to scan. (The settings you chose for the first image apply to these images too. ) t When you return to the client computer, your scanned images appear in the host application's window. Close EPSON TWAIN Pro Network to end your connection to the scanner server and allow other client computers to use the scanner. Some applications, such as Adobe Photoshop LE, automatically close the client computer's connection to the scanner server when you press the ] Start button. You can't use the ] Start button to scan multiple images if you're using these applications. Selecting Resolution Resolution refers to how many dots per inch (dpi) or dots per centimeter (dpcm) your image contains. When EPSON TWAIN Pro Network starts, the EPSON TWAIN Pro Network main menu appears and you connect to the scanner server. Since the settings and controls for EPSON TWAIN Pro Network are the same as those for EPSON TWAIN Pro, see "Scanning with EPSON TWAIN Pro" on page 5 for general scanning instructions. For more detailed information about settings, see the EPSON Expression 1640XL Online Reference Guide on your EPSON Expression 1640XL Scanning Tools CD-ROM. Wait for this message before you exit. Click to exit Before you quit, make sure no client computers are trying to use the scanner. Don't exit if the status area of the EPSON Scan Server dialog box indicates that you are connecting to a client. Wait until you see the message Waiting for connection. If you installed EPSON TWAIN Pro on the scanner server so that you could make a direct connection to the scanner, remember that you must exit EPSON Scan Server to use EPSON TWAIN Pro. [. . . ] t You can click the Start button on the EPSON Scan Server dialog box to send the scanned image to the client computer currently connected to the scanner server. Starting EPSON TWAIN Pro Network You connect to the scanner server by starting EPSON TWAIN Pro Network from the client computer. Select EPSON TWAIN Pro Network as your source, or scanner driver. (You only need to do this step once. ) For example, if you're running Windows and using Presto!PageManager for EPSON as your host application, choose Select Source from the File menu. [. . . ]