User manual EPSON GT-30000N

[. . . ] Color Scanner User's Guide Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON scanner. EPSON is not responsible for any use of this information as applied to other scanners. [. . . ] You see the EPSON GT-30000 Properties window. 3. Make sure Select as default scanner for EPSON Scan Server is checked, and then click OK. 70 Network Scanning Installing the Scanner Server Software for Windows 2000 Before you begin, make sure the GT-30000 is connected to your computer. Also, make sure you've recalibrated your monitor to factory specifications. (See your monitor documentation for instructions. ) Depending on how your computer system was originally set up, you may be asked to insert your Windows 2000 CD-ROM during driver installation. Make sure you have it available, or know where to find the Windows source files on your hard disk (for example, in the Windows folder). If you need help, contact your computer manufacturer. If you've just installed a SCSI interface card, you may be asked to install a SCSI driver at the beginning of installation. Follow the instructions on the screen to install the best driver, then continue with the scanner server installation. 1. Turn on your scanner first, then turn on your computer. When you see the window on the right, insert the EPSON GT-30000 Scanning Tools CD-ROM in your drive and click Next. Network Scanning 71 3. Select Search for a suitable driver for my device, and then click Next. 4. Select CD-ROM drives and Specify a location, if necessary, and click Next. 5. Browse to EPSON\ English\WIN2000 on your CD-ROM drive. (The example to the right uses "F" as the CD-ROM drive letter. Your CD-ROM drive letter may be different. ) Click OK to close the Browse window, and then click Next. Follow the instructions on the screen to complete the driver installation. If you see a message asking for your Windows 2000 CD-ROM, insert it and click OK (or click Browse and locate the Windows 2000 source files on your hard drive; then click OK). 72 Network Scanning 7. When you see the window to the right, click Yes. If prompted for the EPSON Scanners Driver Disk 1, reinsert your EPSON GT-30000 Scanning Tools CD-ROM. Click Finish when you see a message that installation is complete. Continue with the instructions in the next section. Finishing the Scanner Server Installation on Windows 2000 Before your computer can share its scanner, you must install EPSON Scan Server. At the same time, you can install other software that came with your scanner. Your scanner comes with a multi-user license (6) for Presto! [. . . ] EPSON will, at its option, repair or replace on an exchange basis the defective unit, without charge for parts or labor. When warranty service involves the exchange of the product or of a part, the item replaced becomes EPSON property. The replacement unit may be new or refurbished to the Epson standard of quality, and at Epson's option, the replacement may be another model of like kind and quality. Epson's liability for replacement of the covered product will not exceed the original retail selling price of the covered product. [. . . ]