User manual EPSON MX21

[. . . ] User's Guide NPD4256-00 EN Epson AcuLaser MX21/MX20 Series User's Guide Copyright and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] Auto Eject Page Specifies whether or not to eject paper when the limit specified in the Time Out setting is reached. The default is Off, which means paper is not ejected when the time-out limit is reached. Size Ignore If you want to ignore a paper size error, select On. When you turn this item on, the printer keeps printing even if the image size exceeds the printable area for the specified paper size. This may cause smudges because of the toner that is not transferred onto the paper properly. When this item is turned off, the printer stops printing if a paper size error occurs. Auto Cont Using the Control Panel 144 Epson AcuLaser MX21/MX20 Series User's Guide When you turn this setting on, the printer automatically continues printing after a certain period of time when one of the following errors occurs: Paper Set, Print Overrun, or Memory Overflow. When this option is off, you must press the Start button to resume printing. Page Protect Allocates additional printer memory for printing data, as opposed to receiving it. You may need to turn this setting on if you are printing a very complex page. If a Print Overrun error message appears on the LCD panel during printing, turn this setting on and reprint your data. This reduces the amount of memory reserved for processing data so your computer may take longer to send the print job, but it will allow you to print complex jobs. Page Protect usually works best when Auto is selected. You will need to increase your printer's memory if memory errors continue to occur. Note: Changing the Page Protect setting reconfigures the printer's memory, which causes any downloaded fonts to be deleted. LCD Contrast Adjusts the contrast of the LCD panel. Use the u Up and d Down buttons to set the contrast between 0 (lowest contrast) and 15 (highest contrast. ) B/W Reverse Disp. Enables you to reverse the color of the LCD panel. Sound Volume Specifies the volume of sound produced when a button is pressed, fax or scan operation is completed, or an error occurs. Specifies the current date and time by entering the time difference from Greenwich Mean time. Time Setting Specifies the current date and time by entering them directly. Date Format Specifies the format to display the date. Using the Control Panel 145 Epson AcuLaser MX21/MX20 Series User's Guide USB Menu Item USB I/F*1 USB Speed*1 *2 Get IPAddress*2 *3 IP Address*2 *3 *4 *5 SM*2 *3 GW*2 *3 AppleTalk*2 *3 Bonjour*2 *3 USB Ext I/F Init*2 *3 Buffer Size*1 *2 Settings (default in bold) On, Off HS, FS Panel, Auto, PING 0. 0. 0. 1 to 255. 255. 255. 255 0. 0. 0. 0 to 255. 255. 255. 255 0. 0. 0. 0 to 255. 255. 255. 255 On, Off On, Off Normal, Maximum, Minimum *1 After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. [. . . ] Then quit Print & Fax (for Mac OS X 10. 5 or later) or Printer Setup Utility (for Mac OS X 10. 4 or below). Accessing the PostScript printer driver You can change the PostScript printer driver settings in the PostScript printer driver. Changing the printer setup settings You can change or update the printer setup settings according to the options installed in your printer. Select Show Info from the Printers menu. Make necessary changes to the settings, then close the dialog box. Quit Print & Fax (for Mac OS X 10. 5 or later) or Printer Setup Utility (for Mac OS X 10. 4 or below). About the Printer Software 270 Epson AcuLaser MX21/MX20 Series User's Guide Using the PCL6 printer driver To print in the PCL mode, you will have to install the printer driver. [. . . ]