User manual EPSON OPTRA C710

[. . . ] First Edition (September 1999) The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. pROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND , EITHER EXPRESS OR IMPLIED , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] Refer to the Setup Guide for loading instructions. When printing on labels: Acceptable labels Unacceptable labels • • • • • Use only paper labels. Do not print a large number of labels consecutively. Do not use labels that have adhesive exposed on the sheets. Do not use labels that have coating or sizing applied to make the labels liquid-resistant. From the operator panel or from MarkVision, set the Paper Type to Labels. Card stock Note: Load card stock in the multipurpose feeder only. Do not load more than 30 sheets of card stock into the multipurpose feeder. Loading more than 30 sheets of card stock or using the wrong paper source may cause paper jams or a failure to feed. You can load a small quantity of heavier paper in the multipurpose feeder. The properties of the card stock you choose—such as the orientation of the paper fibers, moisture content, thickness, and texture—can affect the print quality. For for optimum results, we recommend using: • Springhill Index Plus 90 lb card stock For more information on card stock your printer supports, refer to the Card Stock & Label Guide on the printer CD. Always set the Paper Type to Card Stock when printing on heavier paper. The printer then adjusts the fuser temperature and engine speed to ensure the best print quality. chapter 6: Media guidelines 103 Storing media Proper storage of media helps ensure trouble-free printing. For best results: • Store media in an environment where the temperature is approximately 21°C (70°F) and the relative humidity is 40%. Store cartons of paper on a pallet or shelf, rather than directly on the floor. If you store individual packages of paper out of the original carton, make sure they rest on a flat surface so the edges do not buckle or curl. Do not place anything on top of paper packages. € • • Avoiding paper jams If you follow the “Media guidelines” on page 98, you’re well on your way to trouble-free printing. If you do experience a paper jam, see page 168 for instructions on clearing the jam. Here are a few reminders to avoid paper jams: • • • Ensure paper guides in trays are properly positioned for the size paper you have loaded. [. . . ] Different symbol sets offer the diverse characters required for different languages or symbol-intense applications. A time interval allotted for certain operations to occur. A type of network communication that conforms to IEEE 802. The name is derived from its physical ring configuration and the passing of a token from adapter to adapter. [. . . ]