User manual EPSON OPTRA E310

[. . . ] OPTRA E310 First Edition (January 1999) The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. pROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND , EITHER EXPRESS OR IMPLIED , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] Each time the printer is reset, the print job in process is terminated. 38 Chapter 4: Troubleshooting If your printer lights look like this: Then your printer: is Busy receiving data, processing data, the print engine is running, or processing/printing a test page. € If you want to reset the printer, push the operator panel button with a long button press. Indicator lights 39 If your printer lights look like this: Then your printer: is Waiting until a Print Timeout occurs or until additional data is received. € Print data stored in the printer buffer by pushing the operator panel button with a brief button press or • reset the printer by pushing the operator panel button with a long button press. 40 Chapter 4: Troubleshooting If your printer lights look like this: Then your printer: is Resetting settings to their power-on default settings or saving settings changed in Configuration Mode. Indicator lights 41 If your printer lights look like this: Then your printer: is Flushing corrupted print data. 42 Chapter 4: Troubleshooting Printer attendance information If your printer lights look like this: Then your printer: detects a Paper Jam. € Open the printer cover, clear all paper from the paper path and close the cover to resume printing. Indicator lights 43 If your printer lights look like this: Then your printer: is prompting you to load media for manual feed. The printer stops and displays this light sequence for each piece of media you want to print. € Load media, with the side to be printed facing the front of the printer, into the manual feeder and push the operator panel button to resume printing, or • reset the printer by pushing the operator panel button with a long button press. If your printer lights look like this: Then your printer: is alerting you that the printer is out of paper/envelopes or that the paper did not feed properly from the automatic paper feeder. € Load media into the automatic paper feeder and push the operator panel button to resume printing or • reset the printer by pushing the operator panel button with a long button press. 44 Chapter 4: Troubleshooting If your printer lights look like this: Then your printer: top cover is open or the print cartridge is not installed. € Close the cover to display the light sequence that appeared before the cover was opened. If your printer lights look like this: Then your printer: flash memory is full (Memory Full) • Print data without saving it in flash memory by pushing the operator panel button with a brief button press or • reset the front panel by pushing the operator panel button with a long button press. Indicator lights 45 If your printer lights look like this: Then your printer: • memory is full, or • received a page that is too complex to print, or • reduces the resolution of a formatted page to 300 dpi before printing, or • has a PPDS font error, or • doesn’t have enough memory to save what is in the buffer (resource save off), or • doesn’t have enough memory to defragment flash memory (insufficient defrag memory), or • cannot communicate with the host computer (host interface error). Each of the errors described above has a unique, secondary error code. Display the secondary error code by double-clicking the operator panel button. 46 Chapter 4: Troubleshooting Secondary Error Codes If your printer lights look like this when you double-click the operator panel button: Then your printer: memory is full (Memory Full). € Reduce the complexity of the job and/or the resolution, or • press the operator panel button with a brief button press to resume printing, or • reset the printer by pushing the operator panel button with a long button press. [. . . ] The material that adheres to the paper or other media to create the printed page. A group of utilities shipped with the printer to help you perform routine printer functions, such as downloading fonts, installing screen fonts and sending printer commands. Fonts that use a single font outline for both screen display and printing. You can use TrueType fonts in Windows applications and scale them to any height. [. . . ]