User manual EPSON OPTRA S

[. . . ] Com First Edition (February 1998) The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. pROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND , EITHER EXPRESS OR IMPLIED , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] To set the printer operator panel: 1 2 3 Make sure the PAPER SIZE for the multipurpose feeder (MP Feeder Size) is set to the correct size paper, envelope, or other print material you are loading. Make sure the PAPER TYPE for the multipurpose feeder (MP Feeder Type) is set to the correct value for the print material you are loading. Press Go to return the printer to the Ready status message. multipurpose Feeder Note: Software settings may override operator panel settings. Multipurpose Feeder 169 Using Your Printer Closing the Multipurpose Feeder 1 Remove print material from the multipurpose feeder. Multipurpose Feeder 2 Push the metal bar straight back to collapse the multipurpose feeder to its short-length position. 3 Close the multipurpose feeder door. 170 Multipurpose Feeder Using Your Printer Receive-only Fax Chapter If your printer has a serial port installed and it is not in use, you can use your printer to receive faxes. Note: Although some Optra S models may be configured with multiple serial ports, the activation of more than one fax port is not permitted. Note: Any time you want use the receive-only fax serial port for a different purpose, you must first follow the instructions for disabling receive-only fax on page 173. If you decide to reactivate receive-only fax, make sure you follow the instructions for receive-only fax setup on page 172. Never attempt to configure your serial port for multiple uses with an A-B switch. 6 Receive-only Fax Hardware Needed To use your printer serial port to receive incoming faxes, you need an external, class 1 fax modem. You can use virtually any brand, as long as it is a class 1 fax modem. Receive-only Fax 171 Using Your Printer Receive-only Fax Setup 1 2 3 Turn the printer power Off (O). Consult the class 1 fax modem documentation for details. Note: Instead of connecting the class 1 fax modem to a computer, you connect it to the serial port of your printer. The end of the modem cable that connects to the serial port must be 25-pin. To Printer Serial Port Receive-only Fax Power Cord External class 1 fax modem Modem Cable Phone Cord 4 5 6 Turn the modem power On. It is very important that you power on the modem before you power on the printer. from the operator panel , select FAX MENU , Fax Port. Select the serial port connected to the modem. [. . . ] TrueType fonts Fonts used by Microsoft Windows that use a single font outline for both screen display and printing. You can scale TrueType fonts to any height, and they print exactly as they appear on the screen. Type size A measurement in pitch or points of a graphic character in a font. Type style The form or shape of the characters in a font. [. . . ]