User manual EPSON PERFECTION V100 STARTUP GUIDE

[. . . ] The scanner is recognized automatically. For Windows users, the dialog box appears during the recognition in progress. Note for Windows 2000 users: When you connect the scanner, the following dialog box appears. Connect the power cord to the AC inlet and plug the other end into an electrical outlet. Read the Safety Instructions on the back of this sheet when setting up and using this scanner. AC inlet c 4. [. . . ] Make sure the carriage moves slightly and the fluorescent lamp on the carriage turns on. 3. Check the installation and the setup Follow these steps to make sure the installation and the setup are completed properly, and the scanner operates correctly. Press the ] Start button on the scanner. Indicator light Installing application software Follow the steps below to install Adobe Photoshop Elements. Double-click the Install Photoshop Elements icon in the Adobe Photoshop Elements folder in the folder of your preferred language. This completes the scanner software installation. Next, set up the scanner as described in "2. Setting up the Scanner". carriage (in the home position) Start button Operate button Installing application software To install Adobe Photoshop Elements, insert the CD in the CD-ROM drive and then follow the on-screen instructions. Note: If the CD does not launch automatically, double-click the My Computer icon. Double-click the CD-ROM icon, and then double-click Setup. exe in the Adobe Photoshop Elements folder. This completes the scanner software installation. Next, set up the scanner as described in "2. Finally, double-click the Online Guide icon. The online guide menu appears. Recovering from Scanner Software Installation Problems If you canceled the scanner software installation before the procedure was completed, or you connected the scanner before installing the software, EPSON TWAIN may be incorrectly installed. Follow these steps to install the software correctly. For Windows Me and 98 users 1. Disconnect the power cord and the interface cable from the scanner. Follow the steps described on the reverse side. For Windows 2000 users 1. Make sure your scanner is turned on and connected to your PC. Right-click the My Computer icon, and then click Properties. In the System Properties dialog box, select the Hardware tab and then click Device Manager. Click the plus (+) sign next to Other devices or Imaging devices. If your scanner appears under Other devices with a question (?) mark or under Imaging devices with an exclamation (!) mark, right-click your scanner name, and then select Uninstall. . . . Your scanner appearing under Other devices with a question (?) mark: When choosing a place for the scanner Place the scanner close enough to the computer for the interface cable to reach it easily. Place the scanner near an electrical outlet where the power cord can be easily unplugged. [. . . ] No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product. SEIKO EPSON CORPORATION and its affiliates shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. Color Image Scanner 5. [. . . ]