User manual EPSON PERFECTION V750 PRODUCT INFORMATION

[. . . ] Make sure the document mat is installed inside the cover. If it is not installed, see "Replacing the Document Mat" on page 9 for instructions. Note: Always keep the document table clean. Do not leave photos on the document table for an extended period of time as they may stick to the glass. Placing Large or Thick Documents 2. Place your document or photo on the document table, face down on the glass. [. . . ] Slide up to two medium format film images into the film holder with the shiny base side facing down. Your images and any wording on the film should appear backwards on 12/05 Epson Perfection V700 Photo/V750 Pro - 5 Epson Perfection V700 Photo/V750 Pro the side that faces up, as shown by the illustration on the film holder. Make sure the entire image frame is positioned in the film holder opening. 6. Close the scanner cover. Note: You cannot use Full Auto Mode to scan medium format film. When you are finished scanning film, be sure to replace the document mat before scanning documents or photos. See "Replacing the Document Mat" on page 9. Open the covers on the 4 × 5 inch film holder. Note: Hold the edge of the film gently or use gloves to touch the film; otherwise you may damage the film. Make sure the white stickers on the back of the film holder and the areas around them are not scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble recognizing your film in Full Auto Mode. Do not cover any of the tiny holes in the film holder or the scanner may have trouble recognizing which film holder you are using. 2. Place the film into the film holder with the shiny base side facing down. Your images and any wording on the film should appear backwards on the side that faces up, as shown by the illustration on the film holder. Make sure the entire image frame is positioned in the film holder opening. 3. Close the cover over the film and press it down until it clicks. Then press down on all the edges of the cover to secure it. Note: Hold the edge of the film gently or use gloves to touch the film; otherwise you may damage the film. Make sure the white stickers on the back of the film holder and the areas around them are not scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble recognizing your film in Full Auto Mode. Do not cover any of the tiny holes in the film holder or the scanner may have trouble recognizing which film holder you are using. 4. Place the film holder on the document table so that it is aligned with the upper right corner and the pins are seated in the holes on the scanner. 3. Close the cover over the film and press it down until it clicks. Then press down on all the edges of the cover to secure it. 5. See "Removing the Document Mat" on page 4. 6 - Epson Perfection V700 Photo/V750 Pro 12/05 Epson Perfection V700 Photo/V750 Pro 4. Place the film holder on the document table so that it is aligned with the upper right corner and the pins are seated in the holes on the scanner. Note: Make sure the white stickers on the back on the film holder and the areas around them are not scratched, dusty, or covered in any way. [. . . ] See the on-screen User's Guide for details. Home and Professional Mode 12/05 Epson Perfection V700 Photo/V750 Pro - 9 Epson Perfection V700 Photo/V750 Pro Transporting the Scanner Before transporting the scanner for a long distance or storing it for an extended period of time, you need to lock the scanner's carriage and transparency unit to prevent damage. Plug in the scanner, turn on the scanner using its power button, and wait until the carriage moves to the home position (near the cover hinge). While the scanner light is green, turn off the scanner using its power button. Open the scanner cover and slide the transparency unit transportation lock to the locked position. [. . . ]