User manual EPSON PHOTOPC 600

[. . . ] Using PhotoPC 600 with Your Computer Using the LCD Monitor Menus Point & Click here for tips on using this On-line Guide Contacting Customer Support Important Notice & Declaration of Conformity Glossary No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. [. . . ] Choosing ON for this setting allows you to get information on the date and time that the photo was taken, the image quality setting, frame number, and the number of photos taken. This menu allows you to erase the currently displayed image. Before accessing the LCD monitor menus, make sure the photo you want to erase is displayed and is not locked. A message appears asking you confirm that you want erase the image. Press SELECT again to erase the image, or press BACK to preserve the image and return to the Playback mode. Note: If you try to erase a locked photo, a message stating that the photo is locked appears on the screen. Press any of the monitor control buttons to the right of the LCD screen to exit the Erase Photo menu, then open the Photo Control menu and unlock the photo as described on page 65. You can use the Photo Control menu to erase, lock, or unlock images in your camera and to get information on the camera's internal and CompactFlash card memory. This menu also allows you to format memory cards and copy images between the camera and the card. Access the LCD monitor menus and select the Photo Control menu as described on page 60, then follow the instructions below for the Photo Control feature you want to use. This mode gives you two ways to erase photos from your camera: Select Photo or Erase All. Use Select Photo to erase one or several photos at a time; use Erase All to erase all photos from the camera's memory. Follow the steps below for the method you want to use. Note: Be sure to unlock the photos before erasing them. Press the SELECT button to enter the Erase mode, then press the or button to choose Select Photo. Press the SELECT button, then press the or button to move forward or back through the images in the camera until the photo you want to erase appears on the screen. If you want to erase other photos at the same time, use the or button to display them, then press the SELECT button to select them. note: t To cancel the selection of a photo , simply press the SELECT button again. T If you select a locked photo, the camera beeps and you can't select the photo until you unlock it, as described on page 65. When you have selected all the photos you want to erase, press the BACK button. A message appears asking you to confirm your selections. Press the SELECT button to erase the images and return to the Photo Control menu; press BACK to return to the Photo Control menu without erasing the photos. [. . . ] Phone (02) 9903 9075 and the system will guide you through a number of choices before faxing the information to your fax machine. This is where you can download the latest software and drivers. Visit the BBS to check out the latest versions. If you have a modem, phone (02) 9417 5090. [. . . ]