User manual EPSON PICTUREMATE 100

[. . . ] Get to know your PictureMate Control Panel LCD panel Power light On button Photo/Options button Mode button Copies button Cancel button Layout button Memory card light Start button Pressing the Mode button will change the following options. Print all the photos, print photos pre-selected in your digital camera when DPOF information is stored on the memory card, or print directly from a digital camera. Print selected photos. Pressing the Layout button will change the following layout options. Print without margins. Print 2 per sheet without margins. Print an index of all the photos. Display setup and maintenance options. i Printer Parts Paper support Memory card slot cover Handle Battery cover Power cable Cartridge compartment cover EXT/IF (USB) port Output tray USB port for computer ii Contents Safety Instructions Important Safety Instructions. [. . . ] To print in Private mode, first search for the printer once in Public mode. After your device has discovered the printer in Public mode once, it will subsequently be able to communicate with and print from it in Private mode. Bluetooth Passkey Any four-digit number (Default = 0000) Bluetooth Communication Mode Private The Passkey setting allows you to set the four-digit Passkey that must be entered into a device before printing if Pairing is selected as the BT Comm. Displays the unique Bluetooth Device Address of the printer. Set at the factory (Example) 11-11-11-11-11-11 Bluetooth Device Address Pairing This mode requires that the four-digit Passkey be entered into a device before it can communicate with and print from the printer. Encryption requires that the four-digit Passkey be entered into a device before it can communicate with and print from the printer. Making settings 1. Connect the Bluetooth Photo Print Adapter to your printer. & See "Connecting and Disconnecting the Bluetooth Photo Print Adapter" on page 27 ON/OFF (Default = OFF) c 2. Caution: Be sure that the printer is not operating before connecting this product. Otherwise, the printer may malfunction. Bluetooth Encryption Press the Mode button to select q. Printing From an External Device 29 3. Press the l or r button to select the desired bluetooth option. See "Outline of settings" on page 28 for information about Bluetooth settings. 3. Press the u or d button to select a number for the digit, then press the l or r button to change the digit. 4. The Bluetooth Passkey Setting (PIN Code Set) If you select Pairing as the BT Comm. Mode or ON as the BT Encryption setting, the Passkey must be entered into a Bluetooth wireless-capable device before it can communicate with and print from the printer. To change the Passkey, follow the instructions below. Select numbers for the other digits in the same manner, then press the x Start button to activate the Passkey. Printing 1. Make sure the Bluetooth Photo Print Adapter is connected to PictureMate and Bluetooth settings have been made. For details on connecting the Bluetooth Photo Print Adapter, see "Connecting and Disconnecting the Bluetooth Photo Print Adapter" on page 27. See "Bluetooth Settings" on page 28 to set the Bluetooth settings. Use the PictureMate's control panel to adjust the print settings. (For example Layout, Color Effect, and Auto Correct) q. Press the l or r button to select Passkey, then press the x Start button. 2. 30 Printing From an External Device 3. Print the data from your Bluetooth enabled device. Note: The settings available may vary among Bluetooth wireless-capable devices. For more information, refer to your device's documentation. For more information about printing from Bluetooth wireless-capable mobile phones, digital still cameras, digital video cameras, PDAs, mobile PCs and other Bluetooth wireless-capable device, refer to the documentation for both the device and the printer. Printing From an External Device 31 Replacing the Photo Cartridge Checking the Photo Cartridge Status (Ink Level) When the photo cartridge is low on ink, you see this icon in the upper-left corner of the LCD screen. Ink low 2. Press the l or r button to select Check Ink Levels, then press the x Start button. 3. You see a screen showing the approximate ink level in your photo cartridge. Press the x Start button to close the screen. You can check the approximate ink level in your photo cartridge at any time. Press the Mode button to select q. 32 Replacing the Photo Cartridge Replacing the Photo Cartridge PictureMate uses photo cartridge equipped with an IC chip. The IC chip accurately monitors the amount of ink, so even if it is removed and later reinserted, all of its ink can be used. [. . . ] Check the data. Display Meaning PictBridge Camera connected. USB Direct Print Camera connected. Icon List Display Meaning Ink is low. PC connected & See "Checking the battery status" on page 52 for the battery icons. AC adapter not connected. Information Display Meaning No memory card. Connect the AC adapter to install the first photo cartridge. 62 Panel Icon List Print Mode Display Display Meaning Print all photos & See "Printing All Photos" on page 16 Setup/Utilities Mode Display Display Meaning Check ink levels. Press the x Start button to enter this mode. & See "Checking the Photo Cartridge Status (Ink Level)" on page 32. [. . . ]