User manual EPSON PL-5000

[. . . ] EPSON PowerLiteTM 5000 User's Guide All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. N e i t h e r S E I K O E P S O N C O R P O R A T I O N nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions. SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. [. . . ] Press the Menu button on the control panel or remote control to display the Main menu. 3 l Using the Projector Menus 2. Press the up or down arrows (control panel) or press the top or bottom of the pointer button (remote) to scroll through the menu choices. up and down buttons pointer button ' Changing a Menu Setting 3. Press either the Enter button (control panel) or the top or bottom multi-purpose button (remote) to display a submenu. I 3 l Enter button multi-purpose top button bottom button multi-purpose A sub-menu such as the following appears. Note: Sub-menus differ, depending on if the current image source is computer or video. Using the Projector Menus 4. 5. Press the up or down arrows (control panel) or the top or bottom of the pointer button (remote) to scroll through the menu choices. Press either the left or right arrow buttons (control panel) or the right or left sides of the pointer button (remote) to change the setting. When you are finished changing settings, press the Menu button again to hide the menu, or select RETURN and press Enter to go back to the Main menu. The changes are saved automatically. 6. Menu Options The following menus are described in this section: l l l Video menu (Image source = Computer) Video menu (Image source = Video) Audio menu 0 Option menu 0 Custom menu Video Menu (Image source = Computer) The Video menu enables you make adjustments to the projected image. The following options are available when the image source is Computer. Menu Options Note: The computer must be connected and operating, and the image source on the projector must be set to computer for you to access these menu options. Menu item Brightness Description Lightens or darkens the overall image. Increase brightness to lighten an image, or decrease it to darken the image. Adjusts the difference between light and dark areas. Increase the contrast to make light areas lighter and dark areas darker. Decrease it to minimize the difference between light and dark areas. Synchronizes with the tracking signal sent from the computer. Adjust this setting to correct fuzziness or to remove streaks from the image. Matches the projector's internal clock to various computer graphic signals Adjust this setting to remove fuzzy lines from the image. Adjusts the color balance of the input source. panel) this item and then press the Enter button (control panel) or multi-purpose button (remote) to enter the color adjustment Then use the pointer button or up and down buttons (control to select a color. Contrast Sync Tracking Color Next, use the pointer button or left and right buttons (control panel) to adjust the selected color. Increase the color setting for more intense color on the screen, and lower the setting for less intense color. When you finish making adjustments, press the Enter button (control panel) or a multi-purpose button (remote) to return to the Computer menu. 3 l Using the Projector Menus Menu item Position Description Select this item and then press the Enter button (control panel) or either multi-purpose button (remote) to enter the screen position adjustment mode. Then use the pointer button or up, down, left, and right buttons (control panel) to move the screen position in the corresponding direction. When you finish making adjustments, press the Enter button (control panel) or a multi-purpose button (remote) to return to the Computer menu. Mouse/Corn Locks and unlocks the Mouse/Com port. Select 1 to assign the wireless mouse control to the computer connected to the Mouse/Com 1 port. The wireless mouse controls the computer connected to Mouse/Com 1 only if the input source is switched to Computer 2. Select 2 to assign the wireless mouse control to the computer connected to the Mouse/Com 2 port. [. . . ] Press either the Computer or Video button on the remote control or control panel to select the proper source. 6 l Troubleshooting Technical Specifications General Type of display Size of liquid crystal panels Resolution Image size Projection distance Remote control range Internal speaker system Optical aspect ratio Zoom ratio Liquid crystal panel, Thin Film Transistor (TFT) 1. 32 inches (33. 6 mm) 800 (horizontal) x 600 (vertical) pixels 21 to 300 inches (0. 6 to 7 meters) 3. 9 to 33 feet (1 to 10 meters) 33 feet (10 meters) 2 x 2W stereo 4 x 3 (horizontal x vertical) 1:1. 3 Projector Lamp Type Power Part number Metal Halide, DC 150w ELPLP03 6. 3 inches (159 mm) 9. 7 inches (245 mm) 15. 0 inches (380 mm) with lens 14. 1 lb (6. 4 kg) 100 to 120 VAC and 200 to 240 VAC 50/60 Hz 100 to 120 VAC, 2. 7 A, 50/60 Hz 200 to 240 VAC, 1. 6 A, 50/60 Hz ENERGY STAR Compliance Operation: 41 to 104° F (5 to 40° C), non-condensing Storage: -4 to 140° F (-10 to 60° C), non-condensing Mechanical Height Width Depth Weight Electrical Voltage Rated frequency Power & Consumption Environmental Temperature Humidity Operation: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing 7 l Technical Specifications Supported Monitor Displays The projector displays images at a resolution of 800 x 600 pixels. To display a higher resolution image, the projector compresses it to 800 x 600. The following table lists the display formats supported by the projector: Computer type IBM PC and I B M PC compatible Formats VGA, VESA, JEGA CGA Resolutions 640 x 480 640 x 200 640 x 400 800 x 600 1024 x 768* 640 x 480 832 x 624 1024 x 768* 640 x 480 800 x 600 Apple Macintosh Standard 8- and 24. bit color monitor NEC PC * The projector uses a patent-pending technology to resize the image to 800 x 600 Note: The frequencies of some computers may not allow the image to be displayed correctly. Note: This projector is compatible with DDC-capable graphic sub-systems and boards only. Monitor and Computer In l/2 connector pin assignments The Monitor and Computer In l/2 connectors are female video RGB, 15-pin micro-D-style connectors. [. . . ]