User manual EPSON POWERLITE 1715C

[. . . ] Epson PowerLite 1705c/1715c Multimedia Projector ® ® User's Guide Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. [. . . ] Position the cursor on the image file you want to project and press note Make sure your camera shows up on your desktop as a drive letter. If it does, it is probably a USB mounted device and will work with the projector software. The EasyMP software does not support TWAIN-compliant digital cameras. Enter. 10. If you want, you can press a side of the pointer button to rotate the image while you're viewing it. To stop viewing images, press the Esc button on the remote control, then select Exit and press Enter. Presenting Image Files From an External Drive This section explains how to project individual image or movie files from an external hard drive or flash memory drive using EasyMP and a USB connection. Connect your external hard drive or flash memory drive (see page 43). Turn on the projector and the remote control, if they're not already on. Select EasyMP as the source by pressing the EasyMP button on the remote control. Use the pointer button on the remote control to position the cursor on the folder where your photos or movies are stored and press Enter. You see your image files when the folder opens. Position the cursor on the image file you want to project and press Enter. 8. If you want, you can press a side of the pointer button to rotate the image while you're viewing it. 94 Presenting from a Digital Camera or External Drive To stop viewing images, press the Esc button on the remote control, then select Exit and press Enter. note If you exit the PC Free mode on the projector, disconnect and re-connect your USB device before starting again. Creating a Scenario A scenario is a combination of images, movies, and/or audio files that you can present from a USB drive. The easiest way to create a scenario is to drag and drop a PowerPoint file on the EMP SlideMaker2 icon on your desktop. This automatically converts the file to a scenario that you can save to the drive. Use this method if you have an existing PowerPoint presentation that you want to transfer to the projector. If you prefer, you can create a scenario from scratch by combining a selection of PowerPoint slides, other graphics, and even movies (see page 96). note To create a scenario, you need a USB drive connected to your computer. Also make sure you've installed the EMP SlideMaker software (available for Windows only), as described on page 166. Converting a PowerPoint File to a Scenario Follow these steps to convert a PowerPoint file to a scenario. Once the scenario is created, you can set up transitions as described on page 101. Make sure the EMP SlideMaker program is closed. Locate the PowerPoint file you want to use in My Computer or Windows Explorer. Drag the file icon on top of the your desktop. EMP SlideMaker2 icon on 4. You see a message that some transitions are not supported. [. . . ] However, each replacement lamp carries the limited 90-day warranty stated above. What This Warranty Does Not Cover: This warranty does not apply to refurbished or reconditioned products. This warranty covers only normal use of the product. 24-hour-per-day or other excessive continual use causes strain and is not considered normal use. [. . . ]