User manual EPSON POWERLITE 54C

[. . . ] EPSON PowerLite 54c/74c Projector Projection distance Control panel Projector Parts Remote control receiver 2. 9 to 34. 4 feet (0. 9 to 10. 5 meters) Front, rear, ceiling Manual 1 W monaural 4:3 (horizontal:vertical) 1:1. 2 38 dB (High brightness mode) 33 dB (Low brightness mode) ± 15° Projection methods Focus adjustment Internal sound system Optical aspect ratio Zoom ring Foot release lever Zoom adjustment Manual Foot Focus ring Zoom ratio Noise level Lens cap Foot Keystone correction angle Audio 2 USB type B vertical (maximum) Computer1/Component Video1 Computer2/ Component Video2 Video (composite) Projection Lamp Power consumption Lamp life Part number 200 W UHE High brightness: about 2000 hours Low brightness: about 3000 hours V13H010L27 S-Video Remote Control Remote control receiver Power inlet Security lock Audio1 RS-232C Monitor Out Range Battery 20 feet (6 meters) CR2025 lithium Mouse Compatibility Supports USB Specifications General Type of display LCD panels (3) Lens Resolution (native format) Color reproduction Brightness (ANSI) Contrast ratio Image size Poly-silicon TFT active matrix Diagonal size: 0. 7 inches (17. 8 mm) F=1. 70 to 1. 87, focal length=21. 3 to 25. 6 mm 74c: 1024 × 768 pixels 54c: 800 × 600 pixels Full color, 16. 8 million colors 2000 lumens (High brightness mode) 1500 lumens (Low brightness mode) 500:1 30 to 300 inches (0. 8 to 7. 6 meters) Dimensions Height Width Depth Weight 3. 4 to 3. 8 inches (87 to 97 mm), feet extended 12. 4 inches (315 mm) 9. 5 inches (240 mm) 6. 4 lb (2. 9 kg) Electrical Rated frequency Power supply Power consumption 50/60 Hz 100 to 120 VAC, 2. 6 A 200 to 240 VAC, 1. 3 A Operating: 280 W Standby: 3 W 10/03 EPSON PowerLite 54c/74c Projector - 1 EPSON PowerLite 54c/74c Projector Environmental Temperature Humidity (non-condensing) Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (­10 to 60 °C) Operating: 20 to 80% RH, Storage: 10 to 90% RH Mode VGAEGA VGA--60 VESA--72 VESA--75 VESA--85 SVGA--56 SVGA--60 SVGA--72 SVGA--75 SVGA--85 XGA--43i XGA--60 XGA--70 XGA--75 XGA--85 SXGA1--70 SXGA1--75 SXGA1--85 SXGA2--60 SXGA2--75 SXGA2--85 SXGA3--43i SXGA3--60 SXGA3--75 SXGA3--85 UXGA--48i UXGA--60 MAC13 MAC16 MAC19--60 MAC19 MAC21 NTSC NTSC 4:3 PAL M-PAL N-PAL PAL--60 SECAM HDTV (480i) HDTV (480p) HDTV (575i) HDTV (575p) HDTV (720p) HDTV (1080i) HDTV (1080i) 33. 75/ 31. 25 1 2 3 Refresh Rate (Hz) 70 60 72 75 85 56 60 72 75 85 43 60 70 75 85 70 75 85 60 75 85 43 60 75 85 48 60 67 75 59 75 75 60 60 50 60 50 60 50 59. 94 59. 94 50 50 60 60 50 Resolution 640 × 350 640 × 640 × 640 × 640 × 800 × 800 × 800 × 800 × 800 × 480 480 480 480 6001 6001 6001 6001 6001 768 2 768 2 768 2 768 2 768 2 Safety and Approvals United States Canada CE Marking FCC 47CFR Part15B Class B (DoC) UL1950 Rev. 950-95 (cUL) Directive 73/23/EEC, 89/336/EEC EN 55022, EN 55024 Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, as well as the monitor and HDTV display formats listed below. To project images output from a computer, the computer's video card must be set at a refresh rate (vertical frequency) that's compatible with the projector; see the following table for compatible formats. If necessary, images are automatically resized to display in the projector's "native" format (such as XGA for the 74c or SVGA for the 54c). [. . . ] Press the E-Zoom button on the remote control. You see a crosshair indicating the center of the zoom-in area. Use the directional buttons to position the crosshair in the area you want to enlarge. Continue pressing the E-Zoom selected area up to 4 times. button to enlarge the Enter = click or left click; press twice for double click Esc = right click To click (or left-click), press the Enter button. To double-click, press the Enter button twice. To click and drag, press down on the Enter button and use the directional buttons to move where you want to drag. To advance slides in a PowerPoint presentation in Slide Show mode, press the Page up or Enter button on the remote control. Press the Page down or Esc button to go back a slide. 4. While the image is enlarged, you can: Use the directional buttons to pan about. When you're done, press the Esc button to return to the original size. Using the Remote Control as a Wireless Mouse When you use the remote control as a wireless mouse, you can control your computer or click through slideshow-style presentations (such as PowerPoint) from up to 20 feet away. To control your computer with the remote, make sure you have connected the USB mouse cable between the projector and your computer. Storing the Remote Control Most of the projector's features can be accessed only with the remote control. To prevent losing it, store it in the projector's remote control storage compartment when you are not using it. Open the door to the remote control tray Place the remote inside and close the door 8 - EPSON PowerLite 54c/74c Projector 10/03 EPSON PowerLite 54c/74c Projector Replacing the Battery Caution When replacing batteries, take the following precautions: Using Password Protection If you assign a password for the projector, a screen appears requesting the password whenever the projector is turned on. If the password is entered incorrectly three times in succession, the projector's operation is locked. To try again, the user needs to disconnect the projector and reconnect it. If an incorrect password is entered nine times in a row, the projector is locked and remains locked until an authorized person at EPSON can unlock it. You can also create a user's logo for the projector, to be displayed as the startup screen and/or AV/Mute screen. Unauthorized users cannot turn it off or change it. This feature discourages theft and provides a way to identify the projector should it be stolen. Additionally, to make sure a borrowed projector is returned, you can temporarily disable the password for a set period of time. When that time has elapsed, the password function is reactivated and the password must be entered before the projector can be used. Follow the instructions below to first set the password, and then turn on the password and/or user logo protection. [. . . ] If the projector has been on, allow it to cool down for at least half an hour (or until the lamp is cool). Warning Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury. Turn the projector upside-down to access the lamp compartment. [. . . ]