User manual EPSON POWERLITE 8150I

[. . . ] EPSON PowerLite 8150i Administrator's Manual ® ® EPSON PowerLite 8150i Multimedia Projector ® ® EPSON PowerLite 8150i ® ® Multimedia Projector Administrator's Manual Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. [. . . ] Note that you don't have to have a memory card installed to save the image. Press the Menu button on the control panel or remote control. Highlight the Capture menu, then press Enter. Video Audio Effect Setting Capture Advanced About Reset All Image Capture User's Logo Capture Execute Execute :Select :Enter 3. Select User's Logo Capture and press Enter. When you see the message "Do you use the present image as a user's logo?" select Yes and press Enter. Use the arrow buttons on the control panel or the Enter button on the remote control to select the area of the image you want to use. When you see the message "Do you use this image?" select Yes and press Enter. 76 Fine-tuning the Projector You see this screen: User's Logo Capture Set the zoom rate. zoom rate : 100 200 300 :Return :Select :Execute 7. Select a zoom rate (display size), then press Enter. When the message "Do you save the user's logo?" appears, select Yes and press Enter. Do not use your projector or video source (computer, DVD player, etc. ) while the logo is being saved. When you see the message "Saving the user's logo is completed, " press Esc to return to the main menu. Selecting When to Display the Image After your image is saved, you can set it as the startup screen, the background screen for the no-signal message, or the screen that's displayed when you press the A/V Mute button (or any combination of the three). Press the Menu button to display the menu screen (if not already displayed). Do one of the following: s To use the image for your startup screen, select the Advanced menu. Then select the Startup Screen option and set it to On. For the No-Signal or A/V Mute screens, select the Setting menu. or A/V Mute option and set it to Logo. s 3. When finished, press Esc to exit the menu system. Fine-tuning the Projector 77 Customizing Projector Features You can use the Setting menu to disable the projector's sleep mode, adjust the image shape, and customize several other features. Highlight the Setting menu, then press Enter. Video Audio Effect Setting Capture Advanced About Reset All Keystone P in P No-Sigual Msg. Prompt A/V Mute BNC Sleep Mode Reset : : : : : : : 0 Composite S-Video OFF Black Blue Logo ON OFF Black Blue Logo RGB YCbCr ON OFF Execute :Select :Enter 3. Use the arrow buttons (control panel) or the Enter button (remote control) to set the following options: s Keystone Corrects the shape of an image that's no longer square after raising the projector. s P in P Selects the source used by the picture-in-picture display (standard composite video or S-Video). s No-Signal Msg. Selects a screen color or image to display when the projector is not receiving a signal. The logo setting displays an image that you have transferred to the projector (see page 76). s Prompt Turns off the identifying text that appears briefly when you switch picture sources. [. . . ] Display There are cases where headers and footers will not be displayed correctly. They can only be displayed with the print layout function. Fonts Fonts that are not installed on the projector will be converted to the installed font that is most similar. Inserts Inserted comments will be disabled. [. . . ]