User manual EPSON POWERLITE 8200I

[. . . ] EPSON PowerLite 8200i/9100i Multimedia Projector ® ® User' Guide s Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. [. . . ] (If replacing the lamp does not solve the problem, contact EPSON. ) The projector is too hot. Turn it off and let it cool before using it. The projector has turned off automatically because it has overheated. Let it cool for a few minutes, then turn it back on. Make sure there is plenty of space around and under the projector for ventilation. If it continues to overheat, you may need to change the air filter. There is a problem with the cooling fan or temperature sensor. Contact EPSON for help. flashing orange red flashing red 56 Using the Projector Using the On-Screen Help If you have a problem while setting up or using your projector, you can get help by pressing the blue ?Help button on top of the projector or the remote control. The following choices are available: I Help for the image Tells you how to solve problems with a blank screen, blurry images, brightness, colors, and image shape I Help for the sound Provides help for audio problems I Language selection Lets you choose to display the help information and projector menus in any of 9 different languages Follow these steps to get help: 1. Press the Sync ­ or Sync + button (on the control panel) or press down or up on the Enter button (remote control) to select the menu you want. Use the Sync ­ or Sync + button (on the control panel) or press down or up on the Enter button (remote control) to highlight the problem you want to solve. Then press the Enter button to select the solution(s). Depending on your choice, you may see another menu, or you may see a list of solutions. To exit the Help system, press the blue ?If none of the Help menu choices solves your problem, see Chapter 5, "Solving Problems. " Using the Projector 57 Shutting Down the Projector note When the projector has not received any input signals for 30 minutes, it automatically turns off the projector lamp and enters "sleep mode. " This conserves electricity, cools the projector, and extends the life of the lamp. If you are done using the projector, unplug the power cord. If you want to start projecting again, press the Power button. When you've finished using the projector, follow the recommended procedure to shut it down. This extends the life of the lamp and protects the projector from possible overheating. If you've connected a computer or laptop and it's displaying only through the projector (the computer's monitor is disconnected or turned off), shut down the computer first; otherwise you won't be able to see your computer's display if you try turning it off after the projector. To turn off the projector, press the red Power button on the projector or remote control. (If you don't want to turn it off, press any other button. ) 3. [. . . ] What EPSON Will Do To Correct Problems: If you elect carry-in warranty service, please bring the product securely packaged in its original container or an equivalent, along with proof of the date of original purchase, to your EPSON Dealer or EPSON Customer Care Center. EPSON will, at its option, repair or replace on an exchange basis the defective unit, without charge for parts or labor. When warranty service involves the exchange of the product or of a part, the item replaced becomes EPSON property. The exchanged product or part may be new or previously repaired to the EPSON standard of quality. [. . . ]