User manual EPSON POWERLITE 822P PRODUCT INFORMATION

[. . . ] Epson PowerLite 822p/83c Projector Control Panel Opens menu system A/V mute slide Control panel Lamp cover Focus ring Indicate projector status Air exhaust vent Security slot Turns projector on and off Projector Parts Up/down arrows and keystone correction Cancel/exit Zoom ring Opens help system Remote control sensor Front adjustable foot Foot release lever Searches for source image Enter button automatically adjusts computer images Left/right arrows and Volume down/up Remote control sensor S-Video port LAN port Video port Computer 1 and 2 (Component Video) ports Audio L-R input ports Audio 1 and 2 input ports Projector Specifications General Type of display Lens Resolution Color reproduction Brightness (ANSI) PowerLite 822p PowerLite 83c Contrast ratio Poly-silicon TFT active matrix F=1. 6 to 1. 74, Focal length=18. 4 to 22. 12 mm 1024 × 768 pixels (XGA) Full color, 16. 77 million colors 2600 lumens (High brightness mode) 2080 lumens (Low brightness mode) 2200 lumens (High brightness mode) 1760 lumens (Low brightness mode) 400:1 30 to 300 inches 2. 8 to 34. 2 feet (. 84 to 10. 4 meters) (depending on zoom/tele lens setting and projector model) Front, rear, ceiling, front ceiling, rear ceiling Manual Manual 7 W monaural 4:3 (horizontal:vertical) 1:1. 2 (optical) 35 dB (High brightness mode) 28 dB (Low brightness mode) Speaker Audio Out port Power inlet Monitor Out port (for Computer1 port output only) Rear adjustable foot RS-232C serial port Holes for attaching ceiling mount bracket Air filter Image size Projection distance Projection methods Focus adjustment Zoom adjustment Internal sound system Optical aspect ratio Zoom ratio Noise level Security lock slot 5/07 Epson PowerLite 822p/83c Projector - 1 Epson PowerLite 822p/83c Projector Keystone correction angle Safety and Approvals ± 30° vertical (maximum) United States Canada Projection Lamp Power consumption 170 W UHE Lamp life About 3000 hours (High brightness); 4000 hours (Low brightness) FCC Part15B Class B (DoC) UL60950-1 ICES-003 Class B CSA C22. 2 No. 60950-1 Compatible Video Formats You can use any of the following video sources: VCR, DVD player, camcorder, digital camera, or gaming console. The projector supports composite video, S-Video, component video, and RGB video, and it automatically senses the video format (HDTV, SDTV, NTSC, PAL, or SECAM). The projector supports these international video standards: Mode NTSC NTSC 4:3 PAL M-PAL N-PAL PAL60 SECAM TV525i TV625i SDTV (480p and 480i) SDTV (576p and 576i) HDTV720p HDTV720p HDTV1080i HDTV1080i Refresh Rate (Hz) 60 60 50 60 50 60 50 60 50 60 50 60 50 60 50 Note: Lamp life results will vary depending upon mode selected, environmental conditions and usage. [. . . ] (See the User's Guide for more information. ) Arrow buttons Turning Off the Picture and Sound Press the A/V Mute button on the remote control or use the A/V Mute slide on the projector to turn off the image and sound and darken your screen. This is useful if you want to temporarily re-direct your audience's attention without the distraction of a bright screen. To turn off the picture and sound, press the A/V Mute button or close the A/V Mute slide on the projector. The screen goes dark. E-Zoom buttons 2. Use the four "arrow" buttons on the remote control to position the cross-hair in the area you want to enlarge. Continue pressing the E-Zoom + button to enlarge the selected area up to 4 times. (Part of the image will be clipped when you zoom in. ) 4. While the image is enlarged, you can: Use the arrow buttons to pan about. Press the E-Zoom ­ button to zoom out. When you're done, press the Esc button to return to the original size. A/V Mute button To turn the image and sound back on, press the button again, or open the AV Mute slide. You can create an image, such as a company logo or a picture, to display on the screen whenever you press the A/V Mute button. See your User's Guide for more information. 8 - Epson PowerLite 822p/83c Projector 5/07 Epson PowerLite 822p/83c Projector Changing the Image's Aspect Ratio If you're projecting a widescreen format image, you can use the Aspect button on the remote control to change the aspect (width to height) ratio from 4:3. You can change video images to 16:9 (widescreen format), or 16:9 (Up) or 16:9 (Down) . Power light Green Lamp light Off Temp. light Off Description The projector is operating normally. The projector is in standby or sleep mode. You can unplug it or press the P Power button to turn it on. Wait for the light to stop flashing and remain orange before unplugging it. Make sure the temperature surrounding the projector does not exceed 95 °F (35 °C) and there is plenty of space around and under the projector for ventilation. Clean the air filter and air vents, if necessary. The projector has overheated and turned itself off. Let it cool for about five minutes, then turn it back on. Make sure there is plenty of space around and under the projector for ventilation. [. . . ] Please consult your state and local regulations regarding disposal or recycling. Gently insert the new lamp along the guide rail. If it doesn't fit easily, make sure it's facing the correct way. Push the lamp down firmly where the label PUSH appears. Caution: Do not touch the glass portion of the lamp assembly. [. . . ]